Unit of competency Outline
Date retreived
22/07/2026 11:43 PM AWST
22/07/2026 11:43 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate light vehicle underground
Operate light vehicle underground
Unit of competency
National Code
RIIVEH203B
RIIVEH203B
State Code
WC371
WC371
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
16/08/2012
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
16/08/2012
Nominal Hours
40
Description
This unit covers the operating of light vehicles in the resources and infrastructure industry. It includes planning and preparing for operations; driving light vehicles; carrying out operator maintenance; and conducting housekeeping activities. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for operations
- 1.1. Access, interpret and apply compliance documentation relevant to the operation of light vehicles underground
- 1.2. Plan and prepare work according to site procedures and relevant compliance documentation
- 1.3. Receive, interpret and clarify shift change over details
- 1.4. Select appropriate type of equipment according to job specifications and to maximise efficiency and effectiveness of work activities
- 1.5. Identify, address and report potential risks and hazards
- 1.6. Select personal protective equipment appropriate for work activities
- 1.7. Inspect and assess site conditions to determine if scaling is required and take action according to site requirements
- 1.8. Conduct equipment pre-start checks to ensure equipment is ready for operation
- 1.9. Identify, address and report environmental issues
- 1.10. Communicate with other personnel using approved underground communication methods
- 1.11. Adhere to emergency procedures to ensure safety of personnel, plant and equipment
2. Drive light vehicle
- 2.1. Carry out start-up procedures
- 2.2. Operate equipment within recommended speed, engine capability, limitations and capacity of equipment
- 2.3. Monitor equipment performance utilising appropriate indicators to aid efficient operations
- 2.4. Manoeuvre equipment to maximise efficiency and ensure safety of other equipment and personnel
- 2.5. Assess road conditions and site conditions to determine appropriate driving techniques
- 2.6. Follow mine procedures for giving way to pedestrians and other vehicles
- 2.7. Complete work according to agreed work plan and outcomes
- 2.8. Carry out shut down/parking procedures
3. Carry out operator maintenance
- 3.1. Conduct visual inspections and fault finding
- 3.2. Conduct routine operational servicing to ensure peak performance of equipment
- 3.3. Adhere to site underground breakdown procedures
4. Conduct housekeeping activities
- 4.1. Clean equipment
- 4.2. Clean and store attachments and other ancillary equipment
- 4.3. Complete all required records and documentation accurately and promptly
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Relevant compliance documentation
may include:
legislative, organisation and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
code of practice
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
Light vehicles are:
defined as being of less than 4.5 tonne GVW
Light vehicles may include:
4WD
car/sedan
small truck
utility
other authorised vehicle
Potential risks and hazards may include:
abandoned equipment
adjoining pit walls
adverse weather conditions (electrical storms, floods, fires)
chemicals
contaminants
equipment
fences
holes
materials
over-hanging rocks
personnel
pot holes
unsafe ground
unstable faces
vehicles
Pre-start checks may include:
air filter restriction indicator
cab (horn, lights, air conditioner)
computer systems
display instrumentation and gauges (indicators, gauges, laser levels)
engine and stop engine lights (orange and red)
fluid levels (windscreen washer tank, hydraulic oil, coolant, grease, water, engine oil, fuel)
visual and audio warning devices and lights
Environmental issues may include:
drainage
dust
emissions
flora and fauna
hazardous chemicals
heritage legislation
noise
runoff
spills
water quality
Start-up procedures may include:
correct location of equipment
safety mechanisms operational (horn, operating lights)
Capacity of equipment may include:
duration of operation
efficient and safe operating speed
operating limitations
type of activities performed
weight and/or load limitations
Indicators may include:
brake air pressure
brake oil temperature
computer indicators
engine oil pressure
fuel filter
oil temperature
parking brake
retarder
service meter
speedometer/odometer
steering filters
tachometer
torque converter
transmission filter
voltmeter
water temperature
Shut down and parking procedures may include:
vehicle is left in designated parking areas
vehicle is left secured
vehicle engine is not left running
Visual inspection and fault finding may include:
cab condition
cab mounts
damage to equipment
danger/out of service tags
engine oil
fire suppression unit
grease lines
light positioning and cleanliness
no combustible material around exhaust
oil leaks (engine, hydraulic hoses, ground) fuel leaks (engine, on ground), water leaks (radiator, hoses)
personal proximity
portable fire extinguisher
radiator top up tank
tyres and rim condition
vehicle number
wheel nuts and studs
windows (clean, emergency exit tag in place)
Routine operational servicing may include:
checking fluid levels
filter changing
greasing
keeping cab clean
tightening loose fittings
Cleaning methods may include:
degreasing
forced air
steam cleaning
vacuum
water
Relevant compliance documentation
may include:
legislative, organisation and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
code of practice
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
Light vehicles are:
defined as being of less than 4.5 tonne GVW
Light vehicles may include:
4WD
car/sedan
small truck
utility
other authorised vehicle
Potential risks and hazards may include:
abandoned equipment
adjoining pit walls
adverse weather conditions (electrical storms, floods, fires)
chemicals
contaminants
equipment
fences
holes
materials
over-hanging rocks
personnel
pot holes
unsafe ground
unstable faces
vehicles
Pre-start checks may include:
air filter restriction indicator
cab (horn, lights, air conditioner)
computer systems
display instrumentation and gauges (indicators, gauges, laser levels)
engine and stop engine lights (orange and red)
fluid levels (windscreen washer tank, hydraulic oil, coolant, grease, water, engine oil, fuel)
visual and audio warning devices and lights
Environmental issues may include:
drainage
dust
emissions
flora and fauna
hazardous chemicals
heritage legislation
noise
runoff
spills
water quality
Start-up procedures may include:
correct location of equipment
safety mechanisms operational (horn, operating lights)
Capacity of equipment may include:
duration of operation
efficient and safe operating speed
operating limitations
type of activities performed
weight and/or load limitations
Indicators may include:
brake air pressure
brake oil temperature
computer indicators
engine oil pressure
fuel filter
oil temperature
parking brake
retarder
service meter
speedometer/odometer
steering filters
tachometer
torque converter
transmission filter
voltmeter
water temperature
Shut down and parking procedures may include:
vehicle is left in designated parking areas
vehicle is left secured
vehicle engine is not left running
Visual inspection and fault finding may include:
cab condition
cab mounts
damage to equipment
danger/out of service tags
engine oil
fire suppression unit
grease lines
light positioning and cleanliness
no combustible material around exhaust
oil leaks (engine, hydraulic hoses, ground) fuel leaks (engine, on ground), water leaks (radiator, hoses)
personal proximity
portable fire extinguisher
radiator top up tank
tyres and rim condition
vehicle number
wheel nuts and studs
windows (clean, emergency exit tag in place)
Routine operational servicing may include:
checking fluid levels
filter changing
greasing
keeping cab clean
tightening loose fittings
Cleaning methods may include:
degreasing
forced air
steam cleaning
vacuum
water
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for the operation of light vehicle underground
implementation of requirements, procedures and techniques for the safe, effective and efficient operation of light vehicle underground
working with others to undertake the operation of light vehicle underground that meets all of the required outcomes
consistent timely operation of light vehicle underground that safely, effectively and efficiently meet the required outcomes
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment should sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular work sites may differ due to site circumstances.
Where applicable, physical resources should include equipment modified for people with disabilities.
Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirements, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistently achieving the required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake the operation of light vehicle underground
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for the operation of light vehicle underground
implementation of requirements, procedures and techniques for the safe, effective and efficient operation of light vehicle underground
working with others to undertake the operation of light vehicle underground that meets all of the required outcomes
consistent timely operation of light vehicle underground that safely, effectively and efficiently meet the required outcomes
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment should sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular work sites may differ due to site circumstances.
Where applicable, physical resources should include equipment modified for people with disabilities.
Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirements, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistently achieving the required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake the operation of light vehicle underground
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH735 | RIIVEH203D | Operate light vehicle underground | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W657 | RII20409 | Certificate II in Underground Metalliferous Mining | Qualification |