Unit of competency Outline

Date retreived
21/07/2026 11:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct field-based acceptance tests for construction materials

Conduct field-based acceptance tests for construction materials

Unit of competency
National Code
MSL973009
State Code
AWO15
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
019909 - Laboratory Technology
Original Release Date
16/08/2016
Nominal Hours
50
Description
This unit of competency covers the ability to conduct in situ tests to confirm the acceptability of raw or manufactured, construction materials prior to or after their use. Personnel are expected to be able to work independently and liaise with site personnel to ensure that testing is conducted safely and efficiently. They may transport samples and/or equipment to and from the site, as necessary, and prepare test pieces on-site for later laboratory testing.This unit of competency is applicable to laboratory personnel working in the geotechnical and construction material testing industry sectors who conduct relatively quick and straightforward control and compliance tests using established test methods. These tests could involve aggregates, concrete, soils, road pavement or other specialised construction materials.The unit could also be relevant to laboratory technicians working in the water/wastewater and trade waste industry sectors.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Prepare for field-based acceptance tests
  • 1.1 Review job request to identify the test method and equipment involved, samples to be collected and/or test pieces to be prepared
  • 1.2 Identify hazards and workplace safe work procedures associated with the site, samples, test methods and equipment used
  • 1.3 Confirm site location, access, timing and any special test requirements
  • 1.4 Assemble all required equipment/materials and check that they are fit for purpose
  • 1.5 Stow equipment/materials to ensure their safe transport, as necessary
  • 1.6 Arrange transport to site, as necessary
  • 1.7 Liaise with appropriate personnel on arrival at site to ensure safety and minimise disruption to other workers during testing/sampling
2 Perform field tests
  • 2.1 Identify locations for in situ tests in accordance with test method or client instructions
  • 2.2 Set up, check and operate test equipment safely and in accordance with workplace procedures and test method
  • 2.3 Perform tests as specified in test method or workplace procedures
  • 2.4 Take sufficient test measurements to ensure reliable data
  • 2.5 Recognise obvious errors or atypical data and take appropriate corrective actions
  • 2.6 Recognise and record details of site conditions that may impact on data quality
  • 2.7 Seek advice to deal with any situation beyond own technical competence
3 Collect site samples and prepare test pieces
  • 3.1 Identify locations for sample collection in accordance with test method or client instructions
  • 3.2 Seek advice if samples cannot be collected or if sampling procedures require modification
  • 3.3 Obtain required samples and maintain their integrity in accordance with sampling procedures or test method
  • 3.4 Label all samples to ensure their traceability
  • 3.5 Recognise and record any information about the sample appearance or site conditions that may impact on sample integrity
  • 3.6 Prepare required test pieces and organise their safe curing, storage and/or transport in accordance with test method
4 Finalise field testing
  • 4.1 Re-instate all disturbed surfaces in accordance with workplace procedures
  • 4.2 Clean all equipment (and vehicle as necessary) to avoid environmental damage, including stormwater run-off and/or transfer of pests
  • 4.3 Check that all equipment/materials are present and undamaged prior to re-stowing them for safe transport, as necessary
  • 4.4 Notify appropriate site personnel on completion of tests and prior to leaving site
  • 4.5 Check serviceability of test equipment on return to base, before storage
  • 4.6 Complete site safety plans, equipment logs and test reports in accordance with workplace procedures
5 Maintain a safe work environment
  • 5.1 Use safe work procedures and personal protective equipment (PPE) to ensure personal safety and that of others
  • 5.2 Minimise environmental impacts of testing/sampling and generation of waste
  • 5.3 Collect and/or dispose of all waste in accordance with environmental/quarantine requirements and workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WA713 MSL973009A Conduct field-based acceptance tests for construction materials Unit of competency
Replaced By
State Code National Code Title Type
OAB99 MSL973021 Conduct field-based acceptance tests for construction materials Unit of competency