Unit of competency Outline

Date retreived
24/07/2026 12:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate and install automotive and marine frames, canopies and side curtains

Fabricate and install automotive and marine frames, canopies and side curtains

Unit of competency
National Code
AURVTT119
State Code
ODV83
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
23/02/2022
View on TGA
State Implementation and Classification
Approved Date
08/07/2022
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
08/07/2022
Nominal Hours
30
Description
This unit describes the skills and knowledge required to measure, trim, assemble and fit automotive and marine frames, canopies and side curtains to manufacturer specifications. It involves preparing for the task, selecting and using specialist equipment and materials and completing workplace procedures and documentation.The unit applies to those undertake routine installation tasks in the automotive and marine trimming, service and repair industry.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install, frames, canopies and side curtains
  • 1.1 Determine job requirements according to workplace instructions
  • 1.2 Access and interpret original equipment manufacturer (OEM) specifications and product installation instructions
  • 1.3 Select automotive or marine upholstery installation method for the identified job requirements
  • 1.4 Identify hazards and environmental issues associated with work tasks, assess potential risks and implement control measures according to workplace policies and procedures
  • 1.5 Select and source fabrication materials according to job requirements
  • 1.6 Select and check installation tools and equipment and personal protective equipment for serviceability
2. Fabricate frames, canopies and side curtains
  • 2.1 Measure and trim materials according to job requirements and workplace instructions
  • 2.2 Fabricate and assemble upholstery according to workplace procedures and job and safety requirements
3. Install frames, canopies and side curtains
  • 3.1 Install upholstery components according to manufacturer specifications, workplace procedures and safety requirements without interfering with existing components
  • 3.2 Test upholstery components and adjust where required, according to workplace procedures
  • 3.3 Conduct final inspection and confirm vehicle is ready for use, according to road safety standards and operational requirements
4. Complete work processes
  • 4.1 Clean work area, collect recyclable material and dispose of waste and non-recyclable materials
  • 4.2 Check, tag, and isolate faulty tools materials and equipment according to workplace procedures
  • 4.3 Store working tools and equipment according to workplace procedures
  • 4.4 Document installation and testing process according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWZ02 AURVTT019 Fabricate and install automotive and marine frames, canopies and side curtains Unit of competency