Unit of competency Outline

Date retreived
22/07/2026 10:24 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assist with preparation of clients for operative procedures

Assist with preparation of clients for operative procedures

Unit of competency
National Code
HLTTHE002
State Code
AUZ59
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/08/2015
View on TGA
State Implementation and Classification
Approved Date
22/01/2016
Field of Education
060301 - General Nursing
Original Release Date
22/01/2016
Nominal Hours
100
Description
This unit of competency describes the skills and knowledge required to prepare, transfer and position clients for operative procedures. This unit applies to operating theatre technicians and other theatre staff who work under the supervision of the anaesthetist and other members of the operating room team.The skills in this unit must be applied in accordance with Commonwealth and State/Territory legislation, Australian/New Zealand standards and industry codes of practice.
Notes
Elements and Performance Criteria
1. Prepare clients for procedure
  • 1.1 Determine preparation needs from review of information1.2 Select and use personal protective equipment appropriate to procedure1.3 Adopt standard and additional infection control guidelines and precautions according to organisation documented procedure1.4 Attach equipment safely and securely to appropriate sites 1.5 Safely detach equipment when no longer required with minimum risk of damage to client, staff or equipment1.6 Safely store equipment in accordance with manufacturer’s recommendations, or prepare ready for re-use1.7 Follow established procedures if equipment is found to be faulty
2. Assist with client transfer
  • 2.1 Identify correct operating table and table orientation before client is transferred2.2 Informrelevant personnel of actions to be performed2.3 Detach equipment not required following correct procedure and infection control requirements2.4 Safely and correctly adjust equipment attached to client during transfer 2.5 Maintain a safe working area and clear passage at all times assessing and controlling for manual task risk factors 2.6 Minimise and respond to client discomfort during transfer 2.7 Re-connect and position equipment once transfer is completed following infection control requirements2.8 Maintain client’s dignity before, during and after transfer
3. Position clients for operative procedure
  • 3.1 Inform client of positioning procedure, reassure and seek co-operation as required3.2 Ensure relevant equipment is available and correctly positioned3.3 Take into account individual client needs and confirm with relevant personnel3.4 Follow correct manual handling procedures and seek assistance 3.5 Safely position clientto meet the requirements of the anaesthetist and surgeon and the clients condition3.6 Seek confirmation of correct position from anaesthetist and surgeon 3.7 Maintain the client in correct position as required, using assistive equipment when available 3.8 Maintain client’s dignity during positioning
No information
No information
Replaces
State Code National Code Title Type
WD309 HLTTH405D Assist with preparation of clients for operative procedures Unit of competency