Unit of competency Outline

Date retreived
22/07/2026 9:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct packaging or folding for textile production

Conduct packaging or folding for textile production

Unit of competency
National Code
LMTTX2013B
State Code
W7508
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
24/10/2014
Field of Education
030105 - Textile Making
Original Release Date
24/10/2014
Nominal Hours
50
Description
This unit covers the skills and knowledge to conduct packaging or folding for textile production.
Notes
Elements and Performance Criteria
1 Prepare work pieces and workstation
  • 1.1 Work pieces or materials are laid out in sequence.
  • 1.2 Work area, bench or seating are set up or prepared according to OHS practices.
  • 1.3 Machine or process is set up.
  • 1.4 Routine minor maintenance is performed as required according to manufacturer specifications.
  • 1.5 Any problems are reported and recorded.
2 Complete packaging or folding tasks
  • 2.1 Machine is operated or process conducted.
  • 2.2 Work is assessed for compliance with quality standards and production specifications.
3 Despatch completed work
  • 3.1 Textile products are checked against quality standards.
  • 3.2 Any faults identified are reported and recorded.
  • 3.3 Completed products are directed for despatch.
  • 3.4 Work documentation is completed as required.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
OHS practices
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
environmental practices
Machine may include
labelling machine or printer
packaging machine
stud machine
folding machine
Routine minor maintenance may include
cleaning work area
minor adjustments to machine settings or components
oiling or lubricating
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence to be considered
Demonstrates skills and knowledge to:
check work against ticket information and workplace standards
prepare workstation and work before commencing operations
apply machine operation techniques
carry out minor machine maintenance according to workplace practices
apply OHS practices in work operations
maintain accurate records

Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks according to instructions
working systematically with attention to detail
working systematically with attention to detail
identifying improvements and avoiding damage
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
State Code National Code Title Type
W6627 LMTTX2013A Conduct packaging or folding for textile production Unit of competency
Replaced By
State Code National Code Title Type
BAU31 MSTTX2004 Conduct packaging or folding for textile production Unit of competency