Unit of competency Outline

Date retreived
23/07/2026 11:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and apply hardware

Select and apply hardware

Unit of competency
National Code
MSFFM2014
State Code
OEL25
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030113 - Cabinet Making
Original Release Date
19/04/2023
Nominal Hours
16
Description
This unit describes the skills and knowledge required to select and apply hardware to new or refurbished furniture or cabinetry. Furniture may be made from any material and may be freestanding or fitted, including kitchen and bathroom cabinetry. Workers with this competency follow established procedures in timber technology industries such as cabinet and furniture making. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Plan and prepare for task
  • 1.1 Identify task requirements from work documentation
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Select hardware to meet design specifications
  • 1.4 Select tools to meet task requirements and check for safety and functionality
2 Attach hardware
  • 2.1 Lay out hardware items in accordance with design
  • 2.2 Take measurements to determine precise location and correct alignment for hardware
  • 2.3 Use machinery in accordance with workplace procedures
  • 2.4 Secure hardware using tools suited to hardware and material to which it is being attached
  • 2.5 Inspect completed work for compliance with quality requirements and rectify any deficiencies
3 Finalise task and maintain equipment
  • 3.1 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 3.2 Clean equipment and complete routine maintenance in accordance with workplace procedures
  • 3.3 Identify, tag and report faulty equipment in accordance with workplace procedures
  • 3.4 Complete task documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI412 MSFFM2003 Select and apply hardware Unit of competency