Unit of competency Outline
Date retreived
21/07/2026 11:39 PM AWST
21/07/2026 11:39 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Co-ordinate in-process quality assurance
Co-ordinate in-process quality assurance
Unit of competency
National Code
FPPQAS3A
FPPQAS3A
State Code
AYE16
AYE16
TGA Status
Replaced
Replaced
DTWD Status
Archived
Archived
State Implementation and Classification
Approved Date
Field of Education
080317 - Quality Management
Original Release Date
Nominal Hours
0
Description
Notes
Elements and Performance Criteria
No information
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Work will be undertaken within company quality assurance policy, practices and procedures.
Company instructions will be provided for sampling and in-process inspection and testing activities.
The person will be aware of the potential environmental impact of out-of-standard performance to their customers.
Monitoring and reporting will typically involve the use and presentation of verbal and written information; the latter in standard format.
Recording may be by manual and/or electronic methods in standard format.
Work is carried out within legislation, policies and procedures:
Occupational Health & Safety
environmental requirements
enterprise policies and procedures
legislation (state and commonwealth)
Standard Operating Procedures (SOP)
ISO9000
Work will be undertaken within company quality assurance policy, practices and procedures.
Company instructions will be provided for sampling and in-process inspection and testing activities.
The person will be aware of the potential environmental impact of out-of-standard performance to their customers.
Monitoring and reporting will typically involve the use and presentation of verbal and written information; the latter in standard format.
Recording may be by manual and/or electronic methods in standard format.
Work is carried out within legislation, policies and procedures:
Occupational Health & Safety
environmental requirements
enterprise policies and procedures
legislation (state and commonwealth)
Standard Operating Procedures (SOP)
ISO9000
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Identifies the critical control points in the process system.
Explains the contents of inspection/test schedules.
Outlines the implication of inadequate attention to monitoring process and product quality.
Explains the regulatory requirements related to product and process quality assurance.
Explains the importance of maintaining equipment and instrument calibration.
Identifies product and process trends from in-process inspections/test results.
Explains action to be taken when actual/emerging performance is outside specification limits.
Defines the quality assurance problem which needs to be addressed.
Identifies options to rectify problems.
Implements appropriate action to rectify problems.
Explains roles, responsibilities and steps necessary to isolate and quarantine suspect product.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Identifies the critical control points in the process system.
Explains the contents of inspection/test schedules.
Outlines the implication of inadequate attention to monitoring process and product quality.
Explains the regulatory requirements related to product and process quality assurance.
Explains the importance of maintaining equipment and instrument calibration.
Identifies product and process trends from in-process inspections/test results.
Explains action to be taken when actual/emerging performance is outside specification limits.
Defines the quality assurance problem which needs to be addressed.
Identifies options to rectify problems.
Implements appropriate action to rectify problems.
Explains roles, responsibilities and steps necessary to isolate and quarantine suspect product.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUY35 | FPPQAS420A | Co-ordinate in-process quality assurance | Unit of competency |