Unit of competency Outline
Date retreived
22/07/2026 8:19 PM AWST
22/07/2026 8:19 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce multiple image plates
Produce multiple image plates
Unit of competency
National Code
ICPPP370C
ICPPP370C
State Code
D3137
D3137
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
10/09/2014
Field of Education
030103 - Printing
Original Release Date
10/09/2014
Nominal Hours
50
Description
This unit describes the performance outcomes, skills and knowledge required to make plates for any printing process with repeated images from film inputs.
Notes
Elements and Performance Criteria
1. Produce step and repeat layout
- 1.1. Client information is gathered to enable step and repeat layout
- 1.2. A layout is produced according to client information
- 1.3. Data is stored for future retrieval using industry software package
- 1.4. A register of stock levels is maintained and advice about the depletion of stock is recorded according to enterprise procedures
2. Set up step and repeat machine
- 2.1. The film is mounted squarely to produce an accurate image
- 2.2. Accurate masks are cut for image protection/bleeds
- 2.3. Mounting foils are positioned in a chase to ensure a quality output
- 2.4. The film or plate is punched, loaded, exposed and processed according to job specifications
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Output may include:
dedicated step and repeat machine either manual or electronically driven.
Input may include:
a variety of images to be assembled in multiples repeated in a single layout.
Capture may include:
a variety of devices electronically or manually operated.
Manipulation/edit may include:
appropriate software and/or masking methods.
Quality standards may include:
should meet client requirements and enterprise and industry standards.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Output may include:
dedicated step and repeat machine either manual or electronically driven.
Input may include:
a variety of images to be assembled in multiples repeated in a single layout.
Capture may include:
a variety of devices electronically or manually operated.
Manipulation/edit may include:
appropriate software and/or masking methods.
Quality standards may include:
should meet client requirements and enterprise and industry standards.
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
the film or plate is punched, loaded, exposed and processed according to job specifications
the underlying skills of step and repeat should be transferable across different pre-press systems and printing processes. It is important that the substrate for reproduction is identified and that the quality of the photographic image be suitable for the identified printing processes
demonstrate an ability to find and use information relevant to the task from a variety of information sources
prepare and set up at least TWO step and repeat layouts for production of multiple repeated images according to the listed Performance Criteria.
Context of and specific resources for assessment
Assessment must ensure:
assessment may take place on the job, off the job or a combination of both. Off the job assessment must be undertaken in a closely simulated workplace environment
it is expected that special purpose tools, equipment and industry software packages will be used where appropriate.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
the film or plate is punched, loaded, exposed and processed according to job specifications
the underlying skills of step and repeat should be transferable across different pre-press systems and printing processes. It is important that the substrate for reproduction is identified and that the quality of the photographic image be suitable for the identified printing processes
demonstrate an ability to find and use information relevant to the task from a variety of information sources
prepare and set up at least TWO step and repeat layouts for production of multiple repeated images according to the listed Performance Criteria.
Context of and specific resources for assessment
Assessment must ensure:
assessment may take place on the job, off the job or a combination of both. Off the job assessment must be undertaken in a closely simulated workplace environment
it is expected that special purpose tools, equipment and industry software packages will be used where appropriate.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D0400 | ICPPP370B | Produce multiple image plates | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUN11 | ICPPRP370 | Produce multiple image plates | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J183 | ICP30412 | Certificate III in Printing and Graphic Arts (Digital Printing) | Qualification |
| W790 | ICP50110 | Diploma of Printing and Graphic Arts (Digital Production) | Qualification |
| J181 | ICP30212 | Certificate III in Printing and Graphic Arts (Graphic Pre-press) | Qualification |
| W792 | ICP50310 | Diploma of Printing and Graphic Arts (Printing) | Qualification |
| J184 | ICP30512 | Certificate III in Printing and Graphic Arts (Printing) | Qualification |