Unit of competency Outline

Date retreived
23/07/2026 2:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Pull apart and re-assemble engineering mechanisms

Pull apart and re-assemble engineering mechanisms

Unit of competency
National Code
MEMPE007
State Code
OEU19
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
19/04/2023
Nominal Hours
25
Description
This unit of competency defines the skills and knowledge required to pull apart engineering mechanisms or any mechanism made up of a number of components. It includes determining the types and quantity of components in the mechanism and re-assembling the mechanism. The mechanisms must have an associated maintenance/instruction manual for the individual to reference.This unit describes entry-level skills and knowledge in preparation for employment within the metal, engineering, manufacturing and associated industries and is suitable for use in institutional-based vocational programs. Skills development takes place under direct supervision.It is not to be used in a traineeship or apprenticeship training program or associated qualifications. It is only to be used in pre-employment programs and carries no credit towards apprenticeship/trade and other qualification types in manufacturing and engineering.The skills in this unit are intended to be developed in combination with the project unit, MEMPE006 Undertake a basic engineering project, and with the development of skills for the unit MEM18001 Use hand tools. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare a job plan
  • 1.1 Comply with work health and safety (WHS) requirements at all times
  • 1.2 Identify job requirements by inspecting the mechanism and from other work information in consultation with a supervisor
  • 1.3 Identify required tools and machines in accordance with job requirements
  • 1.4 Prepare a job plan showing tools and machines to be used and an appropriate sequence of operations
  • 1.5 Confirm plan with supervisor
2. Pull the mechanism apart
  • 2.1 Use and wear appropriate personal protective equipment (PPE) in accordance with procedures
  • 2.2 Clear the work area according to job requirements
  • 2.3 Obtain appropriate tools and equipment
  • 2.4 Follow safe working practices
  • 2.5 Pull the mechanism apart marking components to aid correct re-assembly
  • 2.6 Identify and record the name and quantity of each component
  • 2.7 Use measuring equipment according to job requirements
3. Re-assemble the mechanism
  • 3.1 Use and wear appropriate PPE in accordance with procedures
  • 3.2 Follow safe working practices
  • 3.3 Re-assemble the mechanism following markings and associated manual
  • 3.4 Use measuring equipment according to job requirements
4. Complete work requirements
  • 4.1 Clear work area of waste and clean according to requirements
  • 4.2 Maintain and/or store machines, tools and equipment according to instructions
No information
No information
Replaces
State Code National Code Title Type
WI704 MEMPE007A Pull apart and re-assemble engineering mechanisms Unit of competency
State Code National Code Title Type
BIV9 MEM20422 Certificate II in Engineering Pathways Qualification