Unit of competency Outline

Date retreived
23/07/2026 1:09 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Weld mild steel using oxy-acetylene equipment

Weld mild steel using oxy-acetylene equipment

Unit of competency
National Code
CPCPCM2052
State Code
OCO83
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
27/11/2020
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
01/06/2021
Nominal Hours
8
Description
This unit specifies the skills and knowledge required to weld metals associated with the fabrication, installation and repair of plumbing components and systems using oxy-acetylene equipment.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
Notes
Elements and Performance Criteria
1 Identify welding requirements.
  • 1.1 Access, read and determine welding requirements from relevant job plans and specifications, codes, Australian standards, manufacturer’s specifications and jurisdictional requirements.
  • 1.2 Identify and apply workplace policies and procedures, work health and safety (WHS) and environmental requirements.
2 Prepare for work.
  • 2.1 Create a materials list and collect materials.
  • 2.2 Select and check the serviceability of appropriate tools and equipment including personal protective equipment (PPE).
3 Prepare materials and welding equipment.
  • 3.1 Clean and prepare material using appropriate tools and techniques according to workplace procedures.
  • 3.2 Prepare work area to support efficient welding with oxy-acetylene equipment.
  • 3.3 Assemble and set up welding equipment, including cylinders and regulators, according to workplace procedures.
  • 3.4 Select welding tips, settings and consumables to meet job requirements and welding procedures according to workplace procedures.
4 Perform welding.
  • 4.1 Weld materials to job requirements using safe welding practices.
  • 4.2 Take appropriate action to report or remedy defects in materials or welding equipment, including adjustments to settings and welding technique.
  • 4.3 Clean welds according to workplace requirements.
  • 4.4 Access information and complete documentation according to workplace requirements.
5 Clean up.
  • 5.1 Clear the work area, and dispose of, reuse or recycle materials in accordance with state and territory legislation and workplace policies and procedures.
  • 5.2 Clean tools and equipment, check for serviceability and report any damage, and store and secure.
No information
No information
Replaces
State Code National Code Title Type
WF840 CPCPCM2052A Weld using oxy-acetylene equipment Unit of competency