Unit of competency Outline
Date retreived
21/07/2026 11:19 PM AWST
21/07/2026 11:19 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assemble bra or swimwear
Assemble bra or swimwear
Unit of competency
National Code
LMTCL3006B
LMTCL3006B
State Code
W7172
W7172
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
17/10/2014
Field of Education
030107 - Garment Making
Original Release Date
17/10/2014
Nominal Hours
40
Description
This unit covers the skills and knowledge to plan, align and assemble a bra or swimwear garment from specifications or patterns using a variety of machines and processes.
Notes
Elements and Performance Criteria
1 Prepare workstation
- 1.1 Workbench and seating are set up according to OHS practices.
- 1.2 Machines are cleaned and oil levels checked.
- 1.3 Records are maintained.
- 1.4 Machines are set up and adjusted according to specifications for work.
2 Prepare for assembly of bra or swimwear
- 2.1 Work bundle is received, checked, and any follow-up action is determined.
- 2.2 Components are laid out in sequence.
- 2.3 Bra or swimwear requirements are identified from specifications.
- 2.4 Machining requirements are determined.
- 2.5 Plan for bra or swimwear construction is developed.
3 Identify poor machine performance
- 3.1 Needles, attachments and parts are checked and worn needles and parts are identified and reported or replaced, according to manufacturer instructions.
- 3.2 Performance of machine is regularly checked for signs of faulty operation, including evidence from inspection of finished pieces and required action taken.
4 Assemble bra or swimwear
- 4.1 Bra or swimwear is assembled according to product requirements and quality standards.
- 4.2 Bra or swimwear is assembled according to requirements for personal safety and requirements for speed of work.
- 4.3 Machine speed and work handling are controlled for type of operations, fabrics and product type.
- 4.4 All work is checked for compliance with specifications, including tolerances.
- 4.5 Remedial action is undertaken where non-compliance is detected.
- 4.6 OHS practices are followed in operation of machines.
5 Complete work
- 5.1 Finished garment is inspected and checked against quality standards, any faults are identified and appropriate action taken.
- 5.2 Results of inspection of finished garment are recorded.
- 5.3 All recording requirements are met, including action taken to either reject or correct faulty garment, preventative action taken to avoid any recurrence of defective garment, and completion of production records or packing slips.
- 5.4 Completed work is directed to next operation or packing section.
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
OHS practices
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
environmental practices
Machines may include:
a full range of machines required to complete garment construction, which may include a combination of the following:
a three-thread overlocker, a zigzag sewing machine
three-step, twin needle with binding, channelling, single needle, bar rack
fusing, moulding, gluing, ultrasonic machine
Set-up may include:
correct thread, needle size and length needle guard, tension setting, attachments, correct heat and pressure, correct foot
Components may include:
straps
hooks
elastic
fasteners
ribbon
underwire
foam padding
oil-filled straps
rings
fine lace and delicate fabrics
Assembled may include:
gluing
fusing
sewing
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
OHS practices
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
environmental practices
Machines may include:
a full range of machines required to complete garment construction, which may include a combination of the following:
a three-thread overlocker, a zigzag sewing machine
three-step, twin needle with binding, channelling, single needle, bar rack
fusing, moulding, gluing, ultrasonic machine
Set-up may include:
correct thread, needle size and length needle guard, tension setting, attachments, correct heat and pressure, correct foot
Components may include:
straps
hooks
elastic
fasteners
ribbon
underwire
foam padding
oil-filled straps
rings
fine lace and delicate fabrics
Assembled may include:
gluing
fusing
sewing
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Demonstrates skills and knowledge to:
plan garment assembly
check work pieces against pattern or specifications
prepare workstation and work before commencing sewing operations
apply range of techniques required to assemble garment
operate machines required for complete operations
apply OHS practices in work operations
perform quality checks
work quickly and accurately within defined tolerances
maintain accurate records
Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks according to instructions
working systematically with attention to detail
identifying improvements and avoiding damage
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.
Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects of evidence
Demonstrates skills and knowledge to:
plan garment assembly
check work pieces against pattern or specifications
prepare workstation and work before commencing sewing operations
apply range of techniques required to assemble garment
operate machines required for complete operations
apply OHS practices in work operations
perform quality checks
work quickly and accurately within defined tolerances
maintain accurate records
Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks according to instructions
working systematically with attention to detail
identifying improvements and avoiding damage
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.
Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W6496 | LMTCL3006A | Assemble bra or swimwear | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAX40 | MSTCL3006 | Assemble bra or swimwear | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W378 | LMT31407 | Certificate III in Applied Fashion Design and Technology | Qualification |
| W382 | LMT40307 | Certificate IV in Clothing Production | Qualification |
| W371 | LMT30507 | Certificate III in Clothing Production | Qualification |