Unit of competency Outline

Date retreived
23/07/2026 4:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and monitor boiler draught system

Operate and monitor boiler draught system

Unit of competency
National Code
UEPOPS313
State Code
OAH15
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
15/05/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to operate, inspect and monitor boiler draught equipment.Boiler draught is defined as the difference between atmospheric pressure and the pressure existing in a furnace or the flue gas passage of aboiler.Boiler draught is important to the smooth operation of all the systems in a power generating facility.Competency in this unit requires the ability to plan work, operate boiler draught system plant, test boiler draught system plant, analyse boiler draught system plant faults, monitor and inspect boiler draught system plant and complete all documentation. Individuals will, in general, work under supervision, in a power generation facility as an operator. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare for boiler draught system operation
  • 1.1 Safety issues related to operating and monitoring boiler draught system plant are identified, in accordance with workplace procedures and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations and legislative requirements
  • 1.2 Work requirements including work to permit are identified, in accordance with workplace procedures, from appropriate personnel and documentation
  • 1.3 Documentation to determine boiler draught system plant status is assessed and evaluated, in accordance with workplace procedures
  • 1.4 Inspection, preoperational checks and field preparations for boiler draught system plant service are carried out, in accordance with workplace procedures and manufacturers' recommendations
  • 1.5 Boiler draught system plant operational prerequisites are established, in accordance with workplace procedures and manufacturers' recommendations
  • 1.6 Sequence for recommissioning of boiler draught system plant is determined to suit existing circumstances in accordance with workplace procedures and site requirements
2 Operate boiler draught systemplant
  • 2.1 Boiler draught system plant is operated, in accordance with workplace procedures and manufacturers' operating recommendations
  • 2.2 Boiler draught system plant is monitored and observed, in accordance with workplace procedures, to detect deviations from normal operating conditions
  • 2.3 Corrective actions are taken to rectify abnormalities, in accordance with workplace procedures, industry standards and site requirements
3 Test plant boiler draught systemoperation
  • 3.1 Operational tests are performed, in accordance with workplace procedures
  • 3.2 Boiler draught system plant is observed for correct operational response, in accordance with workplace procedures
  • 3.3 Corrective action is taken, in accordance with workplace procedures, when response does not meet with documentation, boiler draught system plant integrity or personnel safety requirements
  • 3.4 Boiler draught system plant is returned to required operational status upon completion of testing, in accordance with workplace procedures
4 Analyse boiler draught system plant faults
  • 4.1 Causes of abnormal boiler draught system plant operating conditions are identified, in accordance with workplace procedures, by analysing technical and operational information
  • 4.2 Corrective action is taken, in accordance with workplace procedures
  • 4.3 Boiler draught system plant integrity and personnel safety is maintained, in accordance with workplace procedures, and in consultation with appropriate personnel and technical and operational documentation
5 Monitor and inspect boiler draught systemplant
  • 5.1 Boiler draught system plant to be monitored and/or inspected is physically identified, in accordance with workplace procedures
  • 5.2 Boiler draught system plant is monitored and/or inspected, in accordance with workplace procedures, for normal operation or to detect deviations
  • 5.3 Corrective action is taken, in accordance with workplace procedures
  • 5.4 Appropriate personnel are notified, in accordance with workplace procedures, when defects are detected
6 Complete documentation
  • 6.1 Boiler draught system plant problems, movements and status are reported, in accordance with workplace procedures
  • 6.2 Documentation is updated, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE336 UEPOPS313B Operate and monitor boiler draught system Unit of competency
Replaced By
State Code National Code Title Type
ODZ32 UEPOPS082 Operate and monitor boiler draught system Unit of competency