Unit of competency Outline

Date retreived
22/07/2026 9:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install marine engines, controls and instruments

Install marine engines, controls and instruments

Unit of competency
National Code
AURR346131B
State Code
D7660
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
031701 - Maritime Engineering
Original Release Date
12/10/2011
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to install, test and commission inboard and outboard engines, system controls and instrumentation to a vessel.It requires the ability to identify and confirm work requirements, prepare for, install and commission engines, controls or instruments and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices applicable to the work
  • 1.3. Source installation procedures and relevant workshop manuals and manufacturer information
  • 1.4. Determine installation method in accordance with OHS, environmental and industry regulations, and guidelines and enterprise procedures
  • 1.5. Set up work area
2. Install inboard/ outboard engine
  • 2.1. Carry out engine installation in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 2.2. Test inboard or outboard engine for correct operation, make required adjustments and re-test
  • 2.3. Determine the need for water testing
3. Install controls/ steering system
  • 3.1. Carry out installation in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 3.2. Test controls/steering system for correct operation, make required adjustments and re-test
  • 3.3. Determine the need for water testing
4. Install instruments/ accessories
  • 4.1. Carry out installation in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 4.2. Test instruments and accessories for correct operation, make required adjustments and re-test
  • 4.3. Identify the need for water testing
5. Commission the installation
  • 5.1. Test vessel engine/steering system/controls/instruments or accessories under normal conditions for correct operation and in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
6. Clean up work area and maintain equipment
  • 6.1. Make final inspection
  • 6.2. Clean and inspect equipment and tooling according to workplace requirements
  • 6.3. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 6.4. Finalise and process work completion documentation, update customer and warranty information and give to appropriate persons, as required
  • 6.5. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2942 AURR346131A Install marine engines/controls/instruments Unit of competency
Replaced By
State Code National Code Title Type
WF330 AURRTE3008 Install marine engines, controls and instruments Unit of competency
State Code National Code Title Type
D537 AUR20611 Certificate II in Marine Qualification
D541 AUR30511 Certificate III in Marine Qualification