Unit of competency Outline
Date retreived
22/07/2026 4:51 PM AWST
22/07/2026 4:51 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce injection blow moulded products
Produce injection blow moulded products
Unit of competency
National Code
PMBPROD370E
PMBPROD370E
State Code
ODB09
ODB09
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
80
Description
This unit describes the skills and knowledge required to safely operate, control and optimise injection blow moulding processes to produce injection blow moulded products to specifications.This unit applies to an experienced technician working alone or as part of a team.The unit principally refers to the injection moulding part of the machine, which makes the first-stage - or preform - object, and uses normal injection moulding technology but only for a limited range of plastics, and the specialised skills and knowledge required for the stretch blow (second) stage in the next part of the compound machine set-up.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan work requirements
- 1.1 Identify materials requirements, including additives and their amounts or percentage ratios, from job specifications
- 1.2 Identify equipment and processes required for production and upstream and downstream operations from job specifications
- 1.3 Perform pre-operational checks including checking for and controlling hazards, checking planned and historical maintenance fixes and confirming that any historical issues have been appropriately addressed
- 1.4 Identify and check emergency stops, guards and controls
- 1.5 Identify checks and testing processes required for equipment, materials, quality and production management to meet job specifications
- 1.6 Identify housekeeping tasks and waste management strategies according to workplace procedures
- 1.7 Check availability of post-moulding labelling, packaging and storage consumables to complete task once in operation
2. Perform pre-production tasks
- 2.1 Verify equipment requirements against job specifications
- 2.2 Set production process according to equipment and workplace specifications, and adjust process to optimise output based on selected materials
- 2.3 Set up and adjust equipment production line settings according to equipment and job specifications
- 2.4 Verify materials are correct against job specifications
- 2.5 Set up date, batch and materials markings according to workplace procedures
- 2.6 Undertake other pre-startup checks according to equipment specifications and safe workplace procedures
3. Operate and make adjustments to injection blow moulding process
- 3.1 Start up and safely operate moulding processes, and make adjustments to settings to meet job specifications
- 3.2 Operate injection and blow moulding equipment safely, and adjust settings to meet job specifications
- 3.3 Ensure process is operating according to equipment specifications and workplace procedures
- 3.4 Follow checking and testing processes to confirm if output meets job specifications and quality standards, and apply strategies to manage nonconforming outputs
- 3.5 Maintain continuity of process to support production requirements
- 3.6 Accurately complete logs and records and any observations that require attention
- 3.7 Apply waste management strategies to collect excess, discarded or nonconforming materials to be disposed of, recycled or reprocessed according to safe workplace procedures
- 3.8 Clean work area, and clean, adjust and lubricate equipment, according to equipment specifications and workplace procedures
- 3.9 Pause or stop machine cycle in normal and abnormal circumstances according to safe workplace procedures
4. Anticipate and solve process control variances
- 4.1 Recognise existing or potential process control variances and their causes
- 4.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
- 4.3 Monitor process control variances and corrective actions taken until resolved
- 4.4 Accurately complete records and logbooks
5. Shut down injection blow moulding equipment
- 5.1 Shut down equipment according to equipment instructions and safe workplace procedures
- 5.2 Complete equipment clean-up and post-production adjustments according to equipment instructions and safe workplace procedures
- 5.3 Put guards, locks and notices in place to prevent inadvertent startup
- 5.4 Accurately complete workplace shutdown documentation, including logging any identified safety issues or concerns that require attention and notifying management and/or maintenance for action
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAI30 | PMBPROD370 | Produce injection blow moulded products | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGP1 | PMB30121 | Certificate III in Polymer Processing | Qualification |
| BGO8 | PMB40121 | Certificate IV in Polymer Technology | Qualification |