Unit of competency Outline

Date retreived
22/07/2026 7:09 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and maintain lighting equipment

Repair and maintain lighting equipment

Unit of competency
National Code
CUALGT302
State Code
WI129
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
16/05/2014
Field of Education
031301 - Electrical Engineering
Original Release Date
16/05/2014
Nominal Hours
20
Description
This unit describes the performance outcomes, skills and knowledge required to undertake basic repairs to and maintain lighting equipment and accessories used in the screen, media, entertainment and events industries.At this level, individuals are required to use some discretion and judgement and operate under broad supervision within an established framework of plans and procedures.In some States and Territories of Australia, a restricted electrical licence is required to repair and maintain production equipment. Restricted electrical licences allow a person to carry out electrical work incidental to a trade. Incidental work may include fault-finding on equipment or changing like for like equipment by disconnecting and reconnecting the fixed wiring. It does not include any other changes to the fixed wiring.Testing and tagging of electrical equipment must be carried out by a person with the relevant certificate of competency in accordance with the performance specifications of:Australian Standard 3760: 200 In-service safety inspection and testing of electrical equipmentAustralian Standard 3002: 1985 Electrical installations - shows and carnivals.In some States and Territories a licensed electrician would be required to undertake the tasks outlined in Element 2.
Notes
Elements and Performance Criteria
1. Undertake routine maintenance tasks
  • 1.1 Clean and maintain equipment, cables and accessories according to organisational procedures
  • 1.2 Conduct safety checks on equipment according to manufacturer instructions and work health and safety (WHS) guidelines
  • 1.3 Check and replace spares and consumables and ensure production equipment is ready and available to productions at specified locations
  • 1.4 Complete required documentation to ensure accurate records of checked and maintained items, and provide copies to relevant personnel
2. Undertake repair tasks
  • 2.1 Recognise faults and safely shut down equipment if necessary, following manufacturer instructions and organisational procedures
  • 2.2 Isolate fault to specific equipment or parts of equipment using fault detection procedures, and determine nature of repair requirements
  • 2.3 Tag faulty production equipment according to organisational procedures
  • 2.4 Make minor repairs to faulty equipment according to safety requirements, manufacturer instructions and level of own responsibility
  • 2.5 Refer complex repairs to technical specialists or licensed personnel
  • 2.6 Where appropriate, have technical specialists pilot repairs from a remote location
  • 2.7 Discuss faults and repair needs with technical specialists, demonstrating correct use of terminology
3. Document work activity
  • 3.1 Undertake simple modifications to equipment, ensuring current safety measures and deadlines are met
  • 3.2 Complete documentation according to organisational procedures and distribute to relevant personnel as required
  • 3.3 Review repair and maintenance activities to ensure compliance with legislation
No information
No information
Replaced By
State Code National Code Title Type
ODF26 CUALGT312 Repair and maintain lighting equipment Unit of competency