Unit of competency Outline

Date retreived
23/07/2026 7:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out preparatory electrotechnology work activities

Carry out preparatory electrotechnology work activities

Unit of competency
National Code
UEENEEE022B
State Code
W7824
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
29/07/2011
View on TGA
State Implementation and Classification
Approved Date
18/10/2010
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
18/10/2010
Nominal Hours
54
Description
1)1.1) DescriptorThis unit covers the carrying out of preparatory work related to any electrotechnology discipline. It encompasses working safely, following basic instructions under direct supervision. It will include electrotechnology support activities including the use of basic hand tools, the safe use of ladders and elevated work platforms and the fixing and securing of equipment under direction following routine work practices.
Notes
Elements and Performance Criteria
1 Plan to carry out basic electrotechnology support activities.
  • 1.1 OHS procedures for a given work area are obtained and understood through established routines.
  • 1.2 Established OHS risk control measures in preparation for the work are followed.
  • 1.3 Safety hazards not previously identified are reported and advice on risk control measures is sought from the work supervisor.
  • 1.4 Basic work instructions are obtained. The nature and location of the work is obtained from the supervisor or other appropriate person to establish the scope of work to be undertaken.
  • 1.5 Basic work instructions are sought from the supervisor. Advice is sought from the supervisor or other appropriate person to ensure the work is coordinated effectively with others.
  • 1.6 Sources of materials that may be required for the work are established in accordance with established routines.
  • 1.7 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
2 Undertake electrotechnology support activities.
  • 2.1 Established OHS risk control measures for carrying out the work are followed.
  • 2.2 Plant and equipment is checked in strict accordance OHS requirements and procedures.
  • 2.3 Mechanical equipment is installed straight and square in the required locations and within acceptable tolerances.
  • 2.4 Use of basic hand and power tools in accordance with safe working practices and OHS requirements.
  • 2.5 Basic work instructions are carried out under supervision.
  • 2.6 Procedures for referring non-routine events to immediate supervisor for directions are followed.
3 Complete work and tidy up.
  • 3.1 OHS work completion risk control measures and procedures are followed.
  • 3.2 Work site is cleaned and made safe in accordance with established procedures.
  • 3.3 Supervisor is notified of the completion of the work in accordance with established routines.
No information
No information
Replaced By
State Code National Code Title Type
WC427 UEENEEE122A Carry out preparatory energy sector work activities Unit of competency
State Code National Code Title Type
W826 UEE22010 Certificate II in Electrotechnology (Career Start) Qualification