Unit of competency Outline

Date retreived
23/07/2026 6:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct masonry arches

Construct masonry arches

Unit of competency
National Code
CPCCBL3010
State Code
OCP96
TGA Status
Current
DTWD Status
Approved
Current Release Number
4.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
80
Description
This unit specifies the skills and knowledge required to construct various types of masonry arches within walls and above columns or attached piers. This unit applies to bricklayers and blocklayers who construct masonry arches in new or existing structures. It is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work.
  • 1.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 1.2 Read, interpret and apply masonry arch construction requirements from current plans, specifications and codes.
  • 1.3 Follow requirements in workplace safety and environmental documentation and workplace procedures.
  • 1.4 Calculate material quantities required for the task.
  • 1.5 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.6 Identify potential hazards and determine and implement control measures.
  • 1.7 Select and check condition of plant, equipment and tools and report damage or faults to relevant person.
  • 1.8 Check conformity of materials against the specifications and place materials in preparation for the work.
2 Construct wall to springing line of arch.
  • 2.1 Set out location of first course and determine span of arch.
  • 2.2 Lay abutting walls maintaining plumb, gauge and level up to springing line to comply with Australian standards tolerances.
3 Set up arch template.
  • 3.1 Set out arch centre and curve and where appropriate produce a full-size drawing of arch.
  • 3.2 Transfer shape to template materials and cut to shape.
  • 3.3 Locate arch template to height of springing line and crown.
  • 3.4 Adjust toms and wedges or adjustable metal props to ensure arch centre and springing line is level.
4 Cut and lay voussoirs.
  • 4.1 Use full size drawing to determine voussoir shape and size.
  • 4.2 Mark, cut and test voussoirs for parallel joints.
  • 4.3 Lay voussoirs around arch centre.
  • 4.4 Cut and lay spandrels maintaining even collar joints.
5 Clean up.
  • 5.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 5.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 5.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
W9329 CPCCBL3010A Construct masonry arches Unit of competency
State Code National Code Title Type
BGD8 CPC33020 Certificate III in Bricklaying and Blocklaying Qualification