Unit of competency Outline

Date retreived
23/07/2026 6:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and install vehicle rear vision mirrors

Remove and install vehicle rear vision mirrors

Unit of competency
National Code
AURVTN011
State Code
AWZ84
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to remove and install rear vision mirrors attached to vehicle windscreens. It involves preparing for the task, selecting and using tools and equipment, selecting glass adhesives, cleaning glass surface, apply adhesive, positioning and securing rear vision mirror, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and install rear vision mirror
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer removal and installation information and adhesive safety data sheets (SDS) are sourced and interpreted
  • 1.3 Materials for rear vision mirror installation are selected and checked for quality and serviceability
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment are sourced and checked for serviceability
  • 1.6 Work is planned to identify methods, minimise waste, and prevent damage to vehicle
2. Remove and install rear vision mirror
  • 2.1 Rear vision mirror is removed according to workplace procedures and safety and environmental requirements , and without causing damage to vehicle or components
  • 2.2 Glass surface is cleaned and prepared
  • 2.3 Adhesive is prepared and applied to surface for rear vision mirror installation
  • 2.4 Mirror is positioned accurately and installed using manufacturer-approved methods, materials and equipment
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF494 AURVTN2011 Remove and install rear vision mirrors Unit of competency
Replaced By
State Code National Code Title Type
OCL30 AURVTN111 Remove and install vehicle rear vision mirrors Unit of competency