Unit of competency Outline

Date retreived
22/07/2026 9:22 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, inspect and refit light vehicle wheel and tyre assemblies

Remove, inspect and refit light vehicle wheel and tyre assemblies

Unit of competency
National Code
AURLTJ013
State Code
OAK23
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
07/12/2018
View on TGA
State Implementation and Classification
Approved Date
15/03/2019
Field of Education
030503 - Vehicle Mechanics
Original Release Date
15/03/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to remove, inspect and refit light vehicle wheel and tyre assemblies. It involves identifying and confirming work requirements, preparing for the task, removing, inspecting and refitting wheel and tyre assemblies, and completing workplace processes and documentation.This unit applies to those working within the automotive light vehicle service and repair industry. The wheel and tyre assemblies include those of light vehicles, light commercial vehicles or trailers. The work does not involve removing the tyre from the wheel. This unit does not apply to motorcycle or heavy vehicle wheel assemblies.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove light vehicle wheel and tyre assembly
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Obtain and interpret wheel and tyre assembly removal, inspection and refitting information
  • 1.3 Identify hazards and environmental issues, assess potential risks and implement control measures in line with workplace policies
  • 1.4 Identify tools, equipment and materials required for the job, and examine for serviceability
2. Remove and inspect wheel and tyre assembly
  • 2.1 Remove wheel and tyre assembly according to manufacturer and workplace procedures, workplace health and safety requirements and without causing damage to components or systems
  • 2.2 Inspect condition of wheel and tyre assembly, mounting points and fittings for damage and wear
  • 2.3 Report inspection findings and make recommendations for necessary repairs or replacements and adjustments according to workplace procedures
3. Refit wheel and tyre assembly
  • 3.1 Obtain and interpret refitting information in order to identify refitting options required for the job
  • 3.2 Fit and adjust wheel and tyre assembly according to manufacturer specifications, workplace procedures and workplace health and safety requirements
  • 3.3 Carry out tightening sequence and torque settings according to manufacturer specifications and workplace procedures
  • 3.4 Examine wheel assembly for correct assembly and run-out according to manufacturer specifications and workplace procedures, and rectify any issues identified
4. Complete work processes
  • 4.1 Carry out final inspection to ensure work meets workplace expectations and vehicle is ready for use
  • 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Examine and store tools and equipment according to workplace procedures
  • 4.4 Complete workplace documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXC41 AURLTJ003 Remove, inspect and refit light vehicle wheel and tyre assemblies Unit of competency
Replaced By
State Code National Code Title Type
OCJ82 AURLTJ113 Remove, inspect and refit light vehicle wheel and tyre assemblies Unit of competency