Unit of competency Outline

Date retreived
23/07/2026 1:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor and control repairs and modifications on operational pipe

Monitor and control repairs and modifications on operational pipe

Unit of competency
National Code
PMASUP344
State Code
AXM38
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
02/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
040327 - Plumbing
Original Release Date
05/08/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to monitor and control repairs and modifications on operational pipe.This unit of competency applies to operations technicians and those in similar roles who are required to ensure the work specifications are understood and correct preparations are made, confirm that work has been conducted to specifications, recommission the pipeline system after the work and testing is completed, and identify and respond to problems.It does not cover actually doing the repair/modification.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate.This unit of competency aligns to AS 2885 Pipelines - Gas and liquid petroleum (Parts 2 and 3). No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare and plan for pipeline repair or modifications
  • 1.1 Examine the work area and ensure there is adequate access to the affected section of the pipeline
  • 1.2 Identify any on-site hazards or irregularities
  • 1.3 Obtain plans, instructions, relevant codes and drawings of proposed works
  • 1.4 Ensure pipeline repairers are aware of site hazards and confirm that a permit to work has been issued
  • 1.5 Convey information concerning the identified repair/modification to all parties concerned with the repair
  • 1.6 Inform third-parties of the need for access to the site, as necessary
2 Monitor pipe welding, cutting and fabrication
  • 2.1 Ensure the pipeline system is prepared in accordance with procedures and made safe for work to commence
  • 2.2 Monitor the work to ensure that welding, stoppling or modifications are carried out according to the approved work plan
  • 2.3 Verify that the necessary inspection and testing is conducted on the repaired or modification area
  • 2.4 Confirm that test results are valid and that the work has been conducted to specification
  • 2.5 Facilitate site clean-up to remove waste materials and debris and restore the site to original condition
  • 2.6 Sign off the permit to work at the completion of the work
  • 2.7 Ensure that all environmental and heritage obligations are met
3 Recommission pipeline
  • 3.1 Contact the control centre and advise when repairs are completed successfully and arrange for the system to be brought back on line
  • 3.2 Where the line has been manually isolated, restore pipeline operation when authorised to do so
  • 3.3 Inspect the area of the pipeline subject to the permit to work for any sign of leakage or defects
  • 3.4 Confirm the pipeline is holding pressure and the system is meeting operational requirements
4 Complete reports and documentation
  • 4.1 Complete site reports and documentation as required by regulatory bodies or company procedures
  • 4.2 Ensure site drawings are updated to show accurate location of repair or modification
  • 4.3 Liaise with relevant company departments to ensure all records and drawings are updated to reflect the repair/modification
5 Control hazards
  • 5.1 Identify hazards in the pipeline system work area
  • 5.2 Assess the risks arising from those hazards
  • 5.3 Implement measures to control those risks in line with procedures and duty of care
6 Respond to problems
  • 6.1 Identify possible problems in pipeline or process
  • 6.2 Determine problems needing action
  • 6.3 Determine possible fault causes
  • 6.4 Rectify problem using appropriate solution within area of responsibility
  • 6.5 Follow through items initiated until final resolution has occurred
  • 6.6 Report problems outside area of responsibility to designated person
No information
No information
Replaces
State Code National Code Title Type
W8947 PMASUP344B Monitor and control repairs and modifications on operational pipe Unit of competency
Replaced By
State Code National Code Title Type
OCK62 PMASUP349 Monitor and control repairs and modifications on operational pipe Unit of competency