Unit of competency Outline

Date retreived
24/07/2026 12:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce composites using resin transfer moulding

Produce composites using resin transfer moulding

Unit of competency
National Code
PMBPROD394E
State Code
ODA50
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
30
Description
This unit covers the skills and knowledge required to operate, control and optimise resin transfer moulding processes to produce product.This unit applies to an experienced technician working alone or as part of a team.The unit principally refers to the specialised application of thermoset composite resins using a closed moulding technique.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare workplace
  • 1.1 Identify materials requirements, including additives, from job specifications
  • 1.2 Identify equipment and processes required for production and upstream and downstream operations from job specifications
  • 1.3 Perform pre-operational checks including checking for and controlling hazards
  • 1.4 Identify checks and testing processes required for equipment, materials, quality and production management to meet job specifications
  • 1.5 Identify waste management strategies to collect excess, discarded or nonconforming materials to be disposed of, recycled or reprocessed according to workplace procedures
2. Perform pre-production tasks
  • 2.1 Verify equipment requirements against job specifications
  • 2.2 Set production process according to equipment and job specifications, and adjust process to optimise output based on selected materials
  • 2.3 Set up and adjust equipment to meet job specifications
  • 2.4 Verify materials, resins, fibres and cores are correct against job specifications
  • 2.5 Set up date, batch and materials markings according to workplace procedures
  • 2.6 Undertake other pre-startup checks according to equipment specifications and workplace procedures
3. Operate resin transfer moulding process
  • 3.1 Start up and operate resin transfer moulding process, and make adjustments to settings to meet job specifications
  • 3.2 Ensure process is operating according to equipment specifications and workplace procedures
  • 3.3 Follow checking and testing processes to assess if output meets job specifications and quality standards, and apply strategies for managing nonconforming outputs
  • 3.4 Maintain continuity of process to support production
  • 3.5 Accurately complete logs and records
  • 3.6 Work efficiently to minimise scrap and trim according to workplace procedures
  • 3.7 Clean, adjust and lubricate equipment according to equipment specifications and workplace procedures
4. Shut down machine
  • 4.1 Determine type of shutdown and process to be followed from equipment instructions and workplace procedures
  • 4.2 Shut down equipment according to equipment instructions and workplace procedures
  • 4.3 Purge machine using appropriate methods and materials
  • 4.4 Put guards, locks and notices in place to prevent inadvertent startup
  • 4.5 Accurately complete workplace shutdown documentation
  • 4.6 Clean and clear work area after shutdown in readiness for next startup
5. Anticipate and solve process control variances
  • 5.1 Recognise existing or potential process control variances and their causes
  • 5.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 5.3 Monitor process control variances and corrective actions taken until resolved
  • 5.4 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAI15 PMBPROD394 Produce composites using resin transfer moulding Unit of competency