Unit of competency Outline

Date retreived
23/07/2026 6:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake visual inspections

Undertake visual inspections

Unit of competency
National Code
RIICTB301E
State Code
OCY00
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030901 - Construction Engineering
Original Release Date
18/06/2021
Nominal Hours
55
Description
This unit describes the skills and knowledge required to undertake visual inspections in civil construction. This includes walking over, around and under a bridge to assess faults and deterioration and providing a report documenting findings and recommendations.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures. Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to undertake visual inspection
  • 1.1 Obtain, interpret, clarify and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to undertake visual inspections and confirm work activity is compliant
  • 1.3 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify, address and report environmental issues, potential hazards and risks
  • 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Inspect bridge
  • 2.1 Locate access devices in reach of areas for inspection according to job requirements
  • 2.2 Asses faults, damage and deterioration by walking over, under and around the bridge
  • 2.3 Observe bridge under the passage of vehicles to assess faults and deterioration
  • 2.4 Complete reports on condition of bridge stating findings and methods of correction according to job requirements
3. Conduct clean-up activities
  • 3.1 Clear work area and dispose of or recycle materials according to site requirements
  • 3.2 Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements
No information
No information
Replaces
State Code National Code Title Type
WH165 RIICTB301D Undertake visual inspection Unit of competency
State Code National Code Title Type
BGL0 RII30920 Certificate III in Civil Construction Qualification