Unit of competency Outline

Date retreived
22/07/2026 9:19 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Finish heavy off-the-road tyre repairs

Finish heavy off-the-road tyre repairs

Unit of competency
National Code
PMBPROD341E
State Code
ODB59
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030503 - Vehicle Mechanics
Original Release Date
19/05/2021
Nominal Hours
20
Description
This unit covers the skills and knowledge required to finish repairs made to heavy off-the-road tyres. It applies to tyres defined by AS 4457.2-2008 Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair - Tyres (or its replacement) or similar tyres.This unit applies to an individual working alone or as part of a team.The unit principally refers to the practical, theoretical and technical knowledge and well-developed skills required in situations that require some discretion and judgement. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Move tyre into suitable position for finishing
  • 1.2 Secure tyre ready for finishing
  • 1.3 Inspect tyre to ensure it meets required standards
  • 1.4 Select and prepare required equipment according to equipment specifications
  • 1.5 Check and wear required personal protective equipment (PPE)
2. Finish repaired tyre
  • 2.1 Cut and buff surface to meet required standard
  • 2.2 Reshape tread according to job requirements
  • 2.3 Brand tyre to meet required standard
  • 2.4 Finish surface to meet required standard
  • 2.5 Complete final inspection of tyre and repairs to ensure job has been done to required standard
  • 2.6 Apply sealing compound around patch area
3. Complete job
  • 3.1 Move tyre to dispatch area according to workplace procedures
  • 3.2 Accurately complete required paperwork
  • 3.3 Apply waste management strategies to collect and segregate scrap, trim and other materials according to workplace procedures
4. Anticipate and solve process control variances
  • 4.1 Recognise existing or potential process control variances and their causes
  • 4.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 4.3 Monitor process control variances and corrective actions taken until resolved
  • 4.4 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAI46 PMBPROD341 Finish heavy off-the-road tyre repairs Unit of competency
State Code National Code Title Type
BGP1 PMB30121 Certificate III in Polymer Processing Qualification