Unit of competency Outline

Date retreived
24/07/2026 2:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set assembly stations

Set assembly stations

Unit of competency
National Code
MEM03006
State Code
OAX35
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030101 - Manufacturing Engineering
Original Release Date
Nominal Hours
18
Description
This unit of competency defines the skills and knowledge required to set up, adjust and test assembly stations according to defined procedures, it also includes routine maintenance of the equipment.Where the assembly station involves manual production assembly unit MEM03001 Perform manual production assembly should also be selected.Where the assembly station involves the assembly of sheet and plate unit MEM03003 Perform sheet and plate assembly should also be selected.Where the assembly station involves the assembly of electrical and/or electronic components in a production environment unit MEM03004 Perform electronic/electrical assembly (production) should also be selected.Where the selection and use of machine setting skills is required unit MEM07003 Perform routine machine setting and unit MEM07004 Perform complex machine setting, should also be selected as appropriate.Where the setting of automated assembly processes is required unit MEM07040 Set multistage integrated processes should also be selected.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measuring equipment is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of powered tools for hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, job sheets or work instructions
2 Select and use a range of hand tools and equipment
  • 2.1 Use hand tools and equipment for setting assembly stations in a safe manner, according to instructions and procedures
3 Set assembly stations
  • 3.1 Set up assembly stations for a range of processes and operations according to defined procedures
  • 3.2 Observe and implement safe work practices
  • 3.3 Adjust assembly stations to specifications and operational requirements
  • 3.4 Test assembly stations for correct operation
4 Maintain equipment
  • 4.1 Carry out routine maintenance according to SOPs
  • 4.2 Identify and change worn or damaged components
No information
No information
Replaces
State Code National Code Title Type
W5270 MEM03006B Set assembly stations Unit of competency