Unit of competency Outline

Date retreived
22/07/2026 9:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out repairs and alterations to automotive and marine trim

Carry out repairs and alterations to automotive and marine trim

Unit of competency
National Code
AURVTT002
State Code
AWZ19
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
031703 - Marine Construction
Original Release Date
13/07/2016
Nominal Hours
40
Description
This unit describes the performance outcomes required to measure, cut, repair, alter and attach automotive or marine covers or components. It involves preparing for the task, selecting and using specialist tools and equipment, selecting materials, checking material quality, carrying out trim repairs or alterations, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to carry out trim repairs and alterations
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Repair materials are selected and inspected for quality
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Trimming tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.5 Trim materials are matched, measured and cut according to job requirements
  • 1.6 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Repair and attach trim
  • 2.1 Repaired trim materials are pre-fitted and checked for alignment and appearance
  • 2.2 Repair and alteration of trim components are carried out according to manufacturer specifications, workplace procedures and customer requirements
  • 2.3 Tools and equipment are used according to workplace procedures and safety and environmental requirements
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and repaired component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF554 AURVTT2002 Carry out trim repairs and alterations Unit of competency