Unit of competency Outline

Date retreived
23/07/2026 1:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify and apply controls for alternate supplies on the distribution network

Identify and apply controls for alternate supplies on the distribution network

Unit of competency
National Code
UETDREL003
State Code
ODN09
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
06/12/2022
View on TGA
State Implementation and Classification
Approved Date
21/12/2021
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
21/12/2021
Nominal Hours
25
Description
This unit involves the skills and knowledge required to identify and apply controls for alternate supplies on the distribution network in the electricity supply industry (ESI).It includes identifying potential alternate supplies and applying control measures while performing work on or near the de-energised distribution network. It also includes monitoring control measures for the alternate supplies to manage two-way power flow.The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.Other conditions may also apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare to work on the distribution network
  • 1.1 Legislation, regulations, standards, codes of practice and workplace requirements for the work to be performed are referred to and confirmed
  • 1.2 Alternate supplies are identified and control measures are applied in accordance with workplace requirements
  • 1.3 Hazards are identified, risks assessed and control measures identified and applied
  • 1.4 Work permits are organised in accordance with workplace requirements
  • 1.5 Tools, equipment and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order
  • 1.6 Worksite is prepared in accordance with workplace requirements
2 Carry out work on the distribution network
  • 2.1 Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are applied
  • 2.2 Work permits are received and signed in accordance with workplace requirements
  • 2.3 Control measures are monitored for alternative supplies in accordance with workplace requirements
  • 2.4 Manual handling, the use of tools, equipment and PPE are carried out in accordance with workplace requirements
  • 2.5 Work is carried out on the distribution network in accordance with workplace requirements
  • 2.6 Incidents or unplanned events are responded to in accordance with workplace requirements
3 Complete work and documentation
  • 3.1 Work is completed and control measures removed from the worksite in accordance with workplace requirements
  • 3.2 Work permits are signed off in accordance with workplace requirements
  • 3.3 Worksite is rehabilitated, cleaned and made safe in accordance with workplace requirements
  • 3.4 Incidents or unplanned events are reported in accordance with workplace requirements
  • 3.5 Tools and equipment are cleaned, checked and returned in accordance with workplace requirements
  • 3.6 Work records, reports and documentation are completed in accordance with workplace requirements
No information
No information
No information