Unit of competency Outline

Date retreived
23/07/2026 12:16 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out manual excavation

Carry out manual excavation

Unit of competency
National Code
RIICCM205E
State Code
AWB53
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/12/2015
View on TGA
State Implementation and Classification
Approved Date
14/07/2016
Field of Education
030901 - Construction Engineering
Original Release Date
14/07/2016
Nominal Hours
8
Description
This unit describes a participant’s skills and knowledge required to carry out manual excavation in Civil construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for manual excavation
  • 1.1 Access, interpret and apply manual excavation documentation, and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Identify, obtain and implement traffic signage requirements
  • 1.6 Select, and check for faults, equipment and/or attachments for work activities
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Dig small excavations by hand
  • 2.1 Confirm the location and specifications of the intended excavation
  • 2.2 Identify service markers/taped areas
  • 2.3 Determine and confirm location of underground services and avoid damage/interference
  • 2.4 Use hand tools, and dig post holes, small pits and trenches to the required dimensions
  • 2.5 Undertake trench collapse prevention procedures, where excavation is in unstable ground
  • 2.6 Place barricades around the excavation
3. Complete and isolate the excavation
  • 3.1 Clean loose material out of excavation using hand tools
  • 3.2 Check excavation complies with the specification/work instruction
  • 3.3 Clear loose material away from the edge of excavation
4. Conduct housekeeping activities
  • 4.1 Clear work area and dispose of or recycle materials
  • 4.2 Clean and maintain condition of equipment, ensure suitability for use, and address/report issues
  • 4.3 Manage/report hazards, and maintain a safe working environment
  • 4.4 Process written records
No information
No information
Replaces
State Code National Code Title Type
WH081 RIICCM205D Carry out manual excavation Unit of competency
Replaced By
State Code National Code Title Type
OCX12 RIICCM205F Carry out manual excavation Unit of competency