Unit of competency Outline

Date retreived
22/07/2026 8:22 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up, operate and maintain computer numerically controlled (CNC) sizing machines

Set up, operate and maintain computer numerically controlled (CNC) sizing machines

Unit of competency
National Code
MSFFM3021
State Code
WI442
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/06/2014
Nominal Hours
46
Description
This unit of competency covers setting up, operating and maintaining CNC sizing machines to produce furniture or components.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Work instructions are used to determine job requirements, including design, quality, materials, equipment and quantities
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 Material for machining is selected and inspected for appropriate quality
  • 1.4 Procedures are determined for minimising waste material
  • 1.5 Procedures are identified for maximising energy efficiency while completing the job
2 Set up machines
  • 2.1 CNC program is set to job requirements
  • 2.2 Safety equipment, including emergency stops, gauges, guards and controls are checked
  • 2.3 Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
  • 2.4 Machines, cutting tools and jigs are checked for safe and effective operation
  • 2.5 Trial runs are conducted to check machine operation and quality of finished work
  • 2.6 Final adjustments are made to CNC programs and equipment according to workplace procedures
3 Operate machines
  • 3.1 Machines are operated and monitored to ensure product quality and output
  • 3.2 Waste quantities are checked and minimised
  • 3.3 Problems with the required work are identified and reported to appropriate persons
  • 3.4 Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures
  • 3.5 Any authorised changes in working procedures are followed
4 Finalise operation and maintain equipment
  • 4.1 Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  • 4.2 Machinery is cleaned and left in a safe mode
  • 4.3 Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
  • 4.4 Unused hardware is collected and stored for re-use or disposal following workplace procedures
  • 4.5 Waste and scrap materials are dealt with following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8630 LMFFM3030B Set up, operate and maintain CNC sizing machines Unit of competency
Replaced By
State Code National Code Title Type
OEL60 MSFFM3044 Set up, operate and maintain computer numerically controlled (CNC) sizing machines Unit of competency