Unit of competency Outline
Date retreived
23/07/2026 9:17 PM AWST
23/07/2026 9:17 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Set up and produce 3D print
Set up and produce 3D print
Unit of competency
National Code
ICPPRN395
ICPPRN395
State Code
AWG42
AWG42
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
28/06/2016
Field of Education
030103 - Printing
Original Release Date
28/06/2016
Nominal Hours
70
Description
This unit describes the skills and knowledge required to select and use a printer to produce three-dimensional (3D) objects from low to moderate precision data file sets.It applies to individuals, employed in a range of industry sectors, who use 3D graphics and scanning data to replicate 3D objects.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine the print requirements
- 1.1 Printed object requirements are determined against specifications and confirmed with client
- 1.2 Appropriate printer and materials are selected to meet client specifications
- 1.3 Data files are uploaded into the printer software and 3D model is checked to ensure it meets specifications
- 1.4 Quality of data file is assessed and possible adjustments are discussed with client
- 1.5 File is adjusted and saved in required printer format
2. Prepare the 3D printer
- 2.1 Print construction time is determined and client approval obtained
- 2.2 Personal protective equipment (PPE) is selected and fitted in accordance with work health and safety (WHS) procedures
- 2.3 Prestart checks are conducted on the 3D printer to ensure correct operation
- 2.4 Printer settings are adjusted for specified tolerances and client specifications
- 2.5 Printer is charged with specified construction material
- 2.6 Printer build platform is prepared according to manufacturer's operating procedures
3. Operate and monitor the 3D printer
- 3.1 Printer is operated in accordance with manufacturer's operating procedures and WHS procedures
- 3.2 Sensor displays and readings are checked so that they remain within the correct operating parameters throughout the job
- 3.3 Printed object is monitored to check that it is forming as per client specifications, and adjusted as necessary
- 3.4 Consumables are monitored and recharged as required
- 3.5 Errors and faults in operation are reported to relevant personnel for maintenance or repair
4. Remove and prepare model for client
- 4.1 Printed 3D object is removed from the printer bed according to manufacturer's operating procedures
- 4.2 Support framework is removed using appropriate tools, chemicals and PPE, according to manufacturer's operating procedures
- 4.3 3D object is cleaned and prepared against client specifications
5. Finalise the shut down and reset printer
- 5.1 Printer is reset according to the manufacturer's operating procedures
- 5.2 Printer and worksite are cleaned according to organisational procedures and manufacturer's operating procedures
- 5.3 Printer is shut down according to organisational procedures
No information
No information
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAK32 | ICPPTD302 | Set up and produce 3D prints | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AZL5 | ICP31315 | Certificate III in Print Manufacturing | Qualification |
| AZO3 | ICP31215 | Certificate III in Printing | Qualification |