Unit of competency Outline

Date retreived
22/07/2026 10:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install ancillary electronic systems and components

Install ancillary electronic systems and components

Unit of competency
National Code
AURETR027
State Code
AXD76
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
35
Description
This unit describes the performance outcomes required to install and test ancillary electronic systems and components in vehicles or machinery. It involves preparing for the task, installing and testing the operation of the systems and components, and completing workplace processes and documentation. These electronic systems and components may require programming following installation to enable them to communicate with the vehicle or machinery controller area network data bus (CAN-bus or LIN-bus) topography.It applies to those working in the automotive service and repair industry. Ancillary electronic systems and components include those being installed in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install ancillary electronic system and components
  • 1.1 Job requirements are determined according to workplace instructions
  • 1.2 Manufacturer specifications and installation fitting instructions are sourced and interpreted
  • 1.3 Installation options are considered and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools, equipment and materials are selected and checked for serviceability
2. Install and test ancillary electronic system and components
  • 2.1 Electronic system and components are checked for correct application and damage
  • 2.2 Electronic equipment is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • 2.3 Programming code is sought and interpreted, as required, to enable installed equipment to communicate with vehicle or machinery controller area network
  • 2.4 Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications
  • 2.5 Post-installation testing of other electrical and electronic systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF109 AURETR3027 Install ancillary electronic control unit systems and components Unit of competency