Unit of competency Outline

Date retreived
23/07/2026 12:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Modify and repair security equipment and systems

Modify and repair security equipment and systems

Unit of competency
National Code
MEM20022
State Code
OEX22
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
099905 - Security Services
Original Release Date
19/04/2023
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to conduct minor modifications and repairs on a range of security equipment and systems. It requires the ability to diagnose and rectify common basic faults and refer more complex faults for specialist attention. This unit applies to extra-low voltage environments.This unit may form part of the licensing requirements for personnel responsible for maintaining security equipment and systems in those states and territories where these are regulated activities.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1. Identify maintenance and repair requirements
  • 1.1 Follow standard operating procedures (SOPs) and comply with work health and safety (WHS) requirements at all times
  • 1.2 Review job requirements and clarify with appropriate personnel in accordance with organisational requirements
  • 1.3 Obtain system and component specifications and other relevant information
  • 1.4 Identify security equipment and system to be modified or repaired
  • 1.5 Select tools and equipment required for the task
  • 1.6 Identify legislation applicable to the work requirements
2. Perform maintenance
  • 2.1 Access security equipment and system identified for maintenance with minimal disruption to services and others in the work area
  • 2.2 Assess security equipment and system for operational effectiveness against normal operating criteria
  • 2.3 Diagnose faults in security equipment and system
  • 2.4 Undertake repairs or modifications in accordance with manufacturer's specifications
  • 2.5 Identify complex faults and repair requirements and report for specialist attention
  • 2.6 Carry out routine servicing of security equipment and system in accordance with manufacturer specifications
  • 2.7 Reassemble and test security equipment and system components for correct operation in accordance with approved procedures
3. Complete maintenance activities
  • 3.1 Restore work area in accordance with SOPs
  • 3.2 Clean, maintain and store tools and equipment in accordance with SOPs
  • 3.3 Collect, treat and dispose of or recycle waste from service and repair activities in accordance with SOPs
  • 3.4 Document and report malfunctions, faults, wear or damage to tools or equipment in accordance with SOPs
  • 3.5 Notify relevant personnel of work completion in accordance with SOPs
  • 3.6 Complete required documentation in accordance with SOPs
No information
No information
No information