Unit of competency Outline
Date retreived
22/07/2026 11:04 PM AWST
22/07/2026 11:04 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate heavy recovery ancillary equipment
Operate heavy recovery ancillary equipment
Unit of competency
National Code
TLIC4068A
TLIC4068A
State Code
S8279
S8279
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/07/2013
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
04/07/2013
Nominal Hours
40
Description
This unit involves the skills and knowledge required to operate the range of heavy recovery ancillary equipment used in the towing and recovery process.Licensing, legislative, regulatory and certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Check job requirements
- 1.1 Job is reviewed to identify equipment and operating requirements
- 1.2 Ancillary equipment, materials and personnel requirements for safe, effective and efficient operation are identified and organised
- 1.3 Suitable personal protective equipment (PPE) and clothing are selected, used, maintained and stored in accordance with OH&S requirements
2 Prepare heavy recovery ancillary equipment for use
- 2.1 Routine pre-operational checks are carried out in accordance with organisational requirements and manufacturer specifications
- 2.2 Operational systems are checked and calibrated for correct operation in accordance with organisational requirements and manufacturer specifications
- 2.3 Faulty equipment is identified, safety tagged and reported promptly in accordance with organisational procedures
- 2.4 OH&S hazards associated with equipment operation are identified, and risk is assessed and handled in accordance with organisational procedures
- 2.5 Environmental implications associated with operations are identified, assessed and reported in accordance with organisational procedures
3 Operate ancillary equipment
- 3.1 Operational area is checked and personnel in that area are informed of initiation of operation
- 3.2 Equipment is started up using correct sequence and in accordance with organisational requirements and manufacturer specifications
- 3.3 Equipment is operated in a safe and controlled manner in accordance with manufacturer specifications and monitored for performance and efficiency
- 3.4 Input materials are monitored and non-conformances are identified and handled in accordance with organisational requirements
- 3.5 Processing outputs are monitored and adjustments to equipment operation are made to meet job requirements
4 Shut down heavy recovery ancillary equipment
- 4.1 Shut-down procedures for equipment are completed in accordance with organisational requirements and manufacturer specifications
- 4.2 Routine maintenance of equipment is carried out in accordance with organisational requirements and manufacturer specifications
- 4.3 Equipment is stored and secured in accordance with organisational requirements
- 4.4 Malfunctions, faults, irregular performance and damage to equipment are detailed and reported in accordance with organisational requirements
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Ancillary equipment includes:
fire extinguisher
hand tools
socket sets
shovel
crow bar
sledge hammer
wood saw
hacksaw
hydraulic jack
forklift
road train dolly
air bags and cushions
catch equipment
bog mat
track mat
pumps
snatch block
cribbing
chains
lifting slings and strops
cutting equipment
chain saw
Personal safety measures may include:
manual-lifting techniques
three points of contact when using ladders
correct use of safety rails and walkways
safety footwear
high visibility clothing
hearing protection
PPE required for the product class being transported
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
regulatory procedures
Documentation and records may include:
dangerous goods paperwork
emergency procedure guides or HB76 Handbook
dangerous goods licence
site inductions
state and territory heavy vehicle driving licence or permit requirements
state and territory road rules
workplace driving instructions and procedures
vehicle manufacturer’s instructions, specifications and recommended driving procedures, including pre-operational checks of vehicle
emergency procedures
TERP
vehicle work diaries or record books
Applicable procedures and codes may include:
Australian code for the transport of dangerous goods by road or rail: the current Australian Dangerous Goods (ADG) Code
relevant state and territory:
roads and traffic authority driving regulations and licence or permit requirements pertaining to operating heavy vehicles on unsealed roads
road rules
OH&S legislation
fatigue management regulations
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Ancillary equipment includes:
fire extinguisher
hand tools
socket sets
shovel
crow bar
sledge hammer
wood saw
hacksaw
hydraulic jack
forklift
road train dolly
air bags and cushions
catch equipment
bog mat
track mat
pumps
snatch block
cribbing
chains
lifting slings and strops
cutting equipment
chain saw
Personal safety measures may include:
manual-lifting techniques
three points of contact when using ladders
correct use of safety rails and walkways
safety footwear
high visibility clothing
hearing protection
PPE required for the product class being transported
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
regulatory procedures
Documentation and records may include:
dangerous goods paperwork
emergency procedure guides or HB76 Handbook
dangerous goods licence
site inductions
state and territory heavy vehicle driving licence or permit requirements
state and territory road rules
workplace driving instructions and procedures
vehicle manufacturer’s instructions, specifications and recommended driving procedures, including pre-operational checks of vehicle
emergency procedures
TERP
vehicle work diaries or record books
Applicable procedures and codes may include:
Australian code for the transport of dangerous goods by road or rail: the current Australian Dangerous Goods (ADG) Code
relevant state and territory:
roads and traffic authority driving regulations and licence or permit requirements pertaining to operating heavy vehicles on unsealed roads
road rules
OH&S legislation
fatigue management regulations
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment section in Section B of the accreditation submission.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of:
identifying three different types of ancillary recovery equipment and their users
demonstrating safe operation of two types of heavy recovery ancillary equipment
Context of and specific resources for assessment
Assessment must ensure access to:
recovery ancillary equipment, which when used is to be current equipment used in the recovery industry
tools, equipment and PPE currently used in the recovery industry
relevant regulatory and equipment documentation that impacts on work activities
Method of assessment
Practical assessment must occur:
through activities in an appropriately simulated environment consistent with current industry practice, and/or
in an appropriate range of situations in the workplace
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended
Assessment processes and techniques must be appropriate to the language and literacy capacity of the candidate and the work being performed
Performance is demonstrated consistently over a period of time and in a range of contexts expected as part of the job function
The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment section in Section B of the accreditation submission.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of:
identifying three different types of ancillary recovery equipment and their users
demonstrating safe operation of two types of heavy recovery ancillary equipment
Context of and specific resources for assessment
Assessment must ensure access to:
recovery ancillary equipment, which when used is to be current equipment used in the recovery industry
tools, equipment and PPE currently used in the recovery industry
relevant regulatory and equipment documentation that impacts on work activities
Method of assessment
Practical assessment must occur:
through activities in an appropriately simulated environment consistent with current industry practice, and/or
in an appropriate range of situations in the workplace
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended
Assessment processes and techniques must be appropriate to the language and literacy capacity of the candidate and the work being performed
Performance is demonstrated consistently over a period of time and in a range of contexts expected as part of the job function
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWM78 | TLIC4068 | Operate heavy recovery ancillary equipment | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| S795 | TLI42111 | Certificate IV in Driving Operations | Qualification |