Unit of competency Outline

Date retreived
23/07/2026 1:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair pumping systems

Repair pumping systems

Unit of competency
National Code
AURP347666B
State Code
D7643
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030503 - Vehicle Mechanics
Original Release Date
12/10/2011
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to carry out testing and repair of centrifugal and positive displacement pumping systems for outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to undertake test
  • 1.1. Confirm nature and scope of work requirements
  • 1.2. Identify and source procedures, information and tooling required
  • 1.3. Analyse method options, select those most appropriate to the circumstances and make preparations
  • 1.4. Source technical and/or calibration requirements for testing and prepare support equipment
  • 1.5. Identify chemical cleaning agents, their safe handling and disposal methods with respect to environmental requirements
2. Conduct test and analyse results
  • 2.1. Observe occupational health and safety (OHS) requirements, including individual state/territory regulatory requirements and personal protection needs, throughout the work
  • 2.2. Carry out tests in accordance with workplace procedures and manufacturer/component supplier specifications
  • 2.3. Compare test results with specifications to indicate compliance or non-compliance
  • 2.4. Document results with evidence and supporting information and make recommendations
  • 2.5. Process report or forward to persons for action in accordance with workplace procedures
3. Prepare for repair operation
  • 3.1. Confirm work to be carried out
  • 3.2. Plan repair operation, including post-repair testing
  • 3.3. Access and interpret service procedures, workshop manuals and manufacturer information
  • 3.4. Identify and prepare tools, equipment and materials required for servicing job
  • 3.5. Set up work area
4. Repair pumping system
  • 4.1. Identify and observe applicable OHS requirements, including state/territory regulatory requirements and personal protection needs
  • 4.2. Select tooling and equipment to meet job requirements and check to ensure they are in good working order
  • 4.3. Repair pump system following manufacturer/component supplier recommended procedures and specifications
  • 4.4. Complete repair operations without causing damage to any vehicle/machine or component
  • 4.5. Make necessary adjustments in accordance with manufacturer/component supplier specifications
5. Complete work and return unit to customer
  • 5.1. Complete repair schedule documentation and update customer and warranty information as required
  • 5.2. Inspect repaired unit to ensure protective guards, cowlings and safety features are in place
  • 5.3. Clean unit to workplace expectations
  • 5.4. Clean work area, dispose of waste, and store tools and equipment in accordance with workplace procedures
  • 5.5. Provide customer report on repair and explain use and care of equipment and warranty requirements
No information
No information
Replaces
State Code National Code Title Type
W2926 AURP347666A Repair pumping systems Unit of competency
Replaced By
State Code National Code Title Type
WF303 AURPTA3011 Repair pumping systems Unit of competency