Unit of competency Outline

Date retreived
23/07/2026 2:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Establish belays for single pitch climbing on artificial surfaces

Establish belays for single pitch climbing on artificial surfaces

Unit of competency
National Code
SISOCLM005
State Code
OBF72
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
11/09/2019
View on TGA
State Implementation and Classification
Approved Date
13/12/2019
Field of Education
092101 - Sport And Recreation Activities
Original Release Date
13/12/2019
Nominal Hours
15
Description
This unit describes the performance outcomes, skills and knowledge required to select and set up belay systems suitable for single pitch climbs on artificial surfaces. It requires the ability to select the climb route and to select and utilise fixed anchors. Artificial surfaces can be fixed or portable structures and rigging can be for indoor or outdoor environments. It applies to rigging staff and activity leaders who work independently or with limited guidance from others.This unit applies to any type of organisation that delivers recreation activities including commercial, not-for-profit and government organisations.No occupational licensing, certification or specific legislative requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Select route and equipment suitable for the climb.
  • 1.1. Identify safe access to and egress from the pitch.
  • 1.2. Interpret route descriptions, inspect the position and quality of artificial features and select climb route.
  • 1.3. Select a belay system suitable for the climb, conditions, and participant.
  • 1.4. Choose a belay device suitable for the artificial surface conditions and belayer.
  • 1.5. Select other equipment to suit climbing requirements and participants.
  • 1.6. Complete safety and serviceability checks on equipment and tag faulty equipment according to organisational procedures.
2. Set up belay system for artificial surface climbs.
  • 2.1. Select anchors and assess condition, including performance under likely load.
  • 2.2. Set up belay system using existing anchors.
  • 2.3. Select and tie appropriate knots, and rig ropes suitable for load and function within the belay system.
  • 2.4. Establish a belay from which belayer is independent of the system.
  • 2.5. Establish a belay that maintains safety of belayer and climber.
  • 2.6. Position belay away from hazards, or remove as able.
  • 2.7. Determine need for, and establish, back up belay systems.
  • 2.8. Verify manufacturers' recommendations, equipment limitations and safety margins, and rig equipment accordingly.
  • 2.9. Complete safety checks according to organisational procedures.
No information
No information
Replaces
State Code National Code Title Type
D6291 SISOCLA303A Establish belays for climbing on artificial surfaces Unit of competency
State Code National Code Title Type
AE017 SISSS00122 Artificial Climbing Skill set
AF311 SISSS00137 Artificial Climbing Skill set
BEU9 SIS30619 Certificate III in Outdoor Leadership Qualification