Unit of competency Outline
Date retreived
24/07/2026 2:21 AM AWST
24/07/2026 2:21 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Verify reference standards
Verify reference standards
Unit of competency
National Code
MEM15022B
MEM15022B
State Code
W5530
W5530
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
11/09/2006
Field of Education
080317 - Quality Management
Original Release Date
11/09/2006
Nominal Hours
72
Description
The unit covers verifying reference standards used for legal purposes.
Notes
Elements and Performance Criteria
1. Identify the categories and levels of verification for reference standards
- 1.1. The categories of reference standards that the organisation is authorised to verify are identified.
- 1.2. The classes of reference standards required to verify a range of standards are identified.
- 1.3. Tolerances for a range of reference standards are identified.
- 1.4. Tolerances for a range of reference standards are described.
2. Maintain suitable environmental conditions to facilitate verification of reference standards
- 2.1. Reference standard details are recorded in accordance with organisational guidelines.
- 2.2. Sources of possible operational procedures errors in the verification of reference standards are identified.
- 2.3. Required atmospheric conditions for the verification of a range of reference standards are applied.
- 2.4. Environmental conditions are assessed to determine whether a verification can be conducted.
3. Examine the design and required markings for a range of reference standards
- 3.1. The identification marking required for reference standards is located and explained.
- 3.2. Design features of a range of reference standards are correctly identified and applied.
- 3.3. The function of major components for a range of reference standards is described and applied.
- 3.4. The fundamental features of a range of reference standards are identified and explained.
4. Perform verification of reference standards
- 4.1. A variety of reference standards are verified.
- 4.2. Uncertainty and tolerances for reference standards are applied.
- 4.3. Results of verification are documented and certificate of verification is issued in accordance with organisational procedures, legislation and policies.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Reference standards
Mass, volume, density, area, length, master meters, temperature
Operating procedures
Manufacturers' specifications, industry guidelines, Australian standards, legislation, organisational procedures and guidelines
Legislation and policies
Enabling legislation, organisational procedures and guidelines
Workplace health and safety legislation including storage and transportation of test equipment, handling of test equipment, handling of hazardous materials, safety clothing, manual handling techniques, site/premises conditions
Documentation
Fees, verification work sheets, certificate of verification
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Reference standards
Mass, volume, density, area, length, master meters, temperature
Operating procedures
Manufacturers' specifications, industry guidelines, Australian standards, legislation, organisational procedures and guidelines
Legislation and policies
Enabling legislation, organisational procedures and guidelines
Workplace health and safety legislation including storage and transportation of test equipment, handling of test equipment, handling of hazardous materials, safety clothing, manual handling techniques, site/premises conditions
Documentation
Fees, verification work sheets, certificate of verification
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to verify reference standards. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with verifying reference standards, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to verify reference standards. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with verifying reference standards, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M1791 | MEM15.22AA | Verify reference standards | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEW85 | MEM15022 | Verify reference standards | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEJ8 | MEM40119 | Certificate IV in Engineering | Qualification |
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| BEK0 | MEM50119 | Diploma of Engineering - Advanced Trade | Qualification |