Unit of competency Outline
Date retreived
22/07/2026 1:45 PM AWST
22/07/2026 1:45 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Service and repair outdoor power equipment engine management systems
Service and repair outdoor power equipment engine management systems
Unit of competency
National Code
AURPTR103
AURPTR103
State Code
OCL48
OCL48
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030503 - Vehicle Mechanics
Original Release Date
31/03/2021
Nominal Hours
35
Description
This unit describes the skills and knowledge required to service and repair outdoor power equipment engine management systems (EMS) according to manufacturer specifications. The unit involves preparing for the task, determining the service and repair requirements, carrying out the service and repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those working in the outdoor power equipment service and repair industry. The EMS include electronic fuel injection and emission systems in hand-held or wheeled equipment. EMS may include those of two and four-stroke spark ignition engines.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service and repair EMS
- 1.1 Identify job requirements from workplace instructions
- 1.2 Source and interpret workplace inspection and service procedures
- 1.3 Identify and manage hazards associated with the tasks
- 1.4 Select tools and equipment and check for serviceability
2. Determine service and repair requirements of EMS
- 2.1 Inspect and test system according to manufacturer specifications, workplace procedures, and safety requirements
- 2.2 Identify faults through inspection and identify causes
- 2.3 Report inspection findings and test results according to workplace procedures, and include recommendations for necessary service, repair or adjustment
- 2.4 Obtain authorisation to proceed with service and repair in line with recommendations
3. Carry out service and repair activities
- 3.1 Select and check tools, equipment and materials required to conduct service and repair
- 3.2 Remove and inspect components for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements
- 3.3 Fit and adjust reusable, repaired and replacement components according to manufacturer specifications and workplace procedures
4. Check EMS for normal operation
- 4.1 Operate system and compare to manufacturer specifications
- 4.2 Make adjustments as required and adjust and re-test rotary cutting system
5. Complete work processes
- 5.1 Conduct final inspection according to workplace procedures and confirm equipment is ready for use
- 5.2 Clear work area and dispose of or recycle materials according to workplace procedures
- 5.3 Complete documentation according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXB67 | AURPTR003 | Service and repair outdoor power equipment engine management systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFZ1 | AUR30720 | Certificate III in Outdoor Power Equipment Technology | Qualification |