Unit of competency Outline

Date retreived
24/07/2026 1:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce patterns and templates

Produce patterns and templates

Unit of competency
National Code
AURTTA008
State Code
AXB07
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to produce patterns and templates for manufacturing parts or assisting the fitting of accessories. It involves preparing for the task, planning the process, plotting the dimensions and completing the pattern or template, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for production of pattern or template
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Size requirements are checked in relation to production process and finishing capacity of workplace
  • 1.3 Type and quantity of patterns and templates to be produced are identified and materials are obtained
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools, equipment and materials are selected and checked for serviceability
2. Plan process
  • 2.1 Material required for pattern or template is identified for approximate size and characteristics
  • 2.2 Required instruments and equipment are identified, located and assembled
  • 2.3 Drawings and related specifications are identified and interpreted
  • 2.4 Procedures for using pattern development instruments and tooling are confirmed, and equipment and tooling are prepared for use
3. Plot dimensions
  • 3.1 Equipment and tooling are used according to workplace procedures
  • 3.2 Each dimension is measured, exploded and plotted, while maintaining angles, arcs and curves
  • 3.3 Visual inspection and measurements are used to compare pattern dimensions and shapes with drawings and specifications
4 Complete pattern or template
  • 4.1 Pattern or template is completed according to safety requirements and ensuring that it indicates completion date and original drawing details
  • 4.2 Required workplace approval of pattern or template is obtained
  • 4.3 Plans are marked with notations according to workplace procedures
  • 4.4 Plans are copied and filed according to workplace procedures
5. Complete work processes
  • 5.1 Final inspection is made to ensure work is to workplace expectations and pattern or template is presented ready for use
  • 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 5.3 Tools and equipment are checked and stored according to workplace procedures
  • 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF376 AURTTA2008 Produce patterns and templates Unit of competency