Unit of competency Outline
Date retreived
24/07/2026 12:05 AM AWST
24/07/2026 12:05 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install and repair battery systems in a recreational vehicle
Install and repair battery systems in a recreational vehicle
Unit of competency
National Code
MSMRV362
MSMRV362
State Code
AWC22
AWC22
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/05/2016
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
04/05/2016
Nominal Hours
15
Description
This unit of competency covers the skills and knowledge required to install and repair battery systems in a recreational vehicle. It includes dual battery systems. The work will be carried out in a recreational vehicle service and repair facility.This unit of competency covers the preparation for, installation/repair of and clean-up after the battery system work.The operator will be required to work to procedures, and follow plans/specifications, insurance requirements and customer needs. This unit of competency applies to an individual working alone or as part of a team/work group and working in liaison with other shift team members.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work
- 1.1 Review the requirements of the work, including insurance requirements and customer needs
- 1.2 Determine impact on electrical system of proposed changes
- 1.3 Examine existing battery system, its capacity to handle proposed changes, determine what needs to be done and how to do it
- 1.4 Check required tools and jigs are available at the worksite
- 1.5 Check required materials and components are available at the worksite
- 1.6 Identify any hazards and the related hazard controls
- 1.7 Check that hazard controls are in place and operational
- 1.8 Query any items that are different to usual and clarify requirements
- 1.9 Remove items as required to make access for required work, maximising the potential for reuse
- 1.10 Temporarily store items which are to be reused
2 Install additional battery in accordance with devised procedures
- 2.1 Use relevant hazard controls, including personal protective equipment (PPE)
- 2.2 Install appropriate battery housing/restraint
- 2.3 Install required electrical connections
- 2.4 Place, fix and connect additional battery
- 2.5 Test system and make any required changes
- 2.6 Segregate and handle waste in accordance with procedures
3 Repair battery system in accordance with devised procedures
- 3.1 Use relevant hazard controls, including PPE
- 3.2 Test battery system and determine fault
- 3.3 Isolate location of fault where practical
- 3.4 Replace components or repair fault as appropriate
- 3.5 Run and connect new cabling if required
- 3.6 Ensure any redundant cable is removed or left in a safe condition as appropriate
- 3.7 Test system and make any required changes
- 3.8 Segregate and handle waste in accordance with procedures
4 Make good area of work in accordance with devised procedures
- 4.1 Reinstate/replace removed items
- 4.2 Check items are fixed appropriately
- 4.3 Apply seals/sealing materials as required
- 4.4 Trim as required
- 4.5 Check items function as intended and make adjustments as required
5 Finish battery system work
- 5.1 Check work undertaken and make any required adjustments
- 5.2 Clean up recreational vehicle and make ready for hand back to customer
- 5.3 Clean up work area, leaving it ready for the next job
- 5.4 Segregate and handle waste in accordance with procedures
- 5.5 Complete any required documentation/records
No information
No information
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OFD38 | MSMRV386 | Repair recreational vehicle extra-low-voltage electrical systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AZG7 | MSM21015 | Certificate II in Recreational Vehicle Service and Repair | Qualification |
| AZG6 | MSM31015 | Certificate III in Recreational Vehicle Service and Repair | Qualification |