Unit of competency Outline

Date retreived
23/07/2026 3:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Provide infrastructure for telecommunications network customer equipment

Provide infrastructure for telecommunications network customer equipment

Unit of competency
National Code
ICTTEN309
State Code
AWD49
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
55
Description
This unit describes the skills and knowledge required to install supporting infrastructure for telecommunications equipment and associated hardware, including access equipment and associated media, power and monitoring equipment, and alarm systems.It applies to field officers, installation technicians or technical supervisors of contractors or other service providers for switching, transmission, radio networks and the various transmission paths, including cable, optical fibre, radio, microwave and satellite.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for installation infrastructure work
  • 1.1 Obtain relevant legislation, codes, regulations and standards for compliance when conducting work
  • 1.2 Notify customer to arrange site access and obtain installation plan and specifications
  • 1.3 Conduct a site survey to verify infrastructure installation requirements can be met
  • 1.4 Identify site hazards and notify appropriate personnel to make site safe
  • 1.5 Notify customer of alterations required to installation design and make recommendations for possible solutions
  • 1.6 Obtain approval for alterations, and update installation plan
  • 1.7 Develop installation activity schedule to minimise disruption to the workplace and according to relevant regulations and standards
  • 1.8 Obtain material supplies, safety equipment, resources, tools and test equipment to be available when required for installation for safe work practice
2. Build customer equipment infrastructure
  • 2.1 Prepare for given work according to work health and safety (WHS) and environmental requirements
  • 2.2 Build telecommunications closet or telecommunications equipment room to house equipment, distributors and AC-DC power systems according to design plans, manufacturer’s specifications and to safety and electrical standards
  • 2.3 Build cable support systems for signal, data cabling and optical cables, including entrance facilities, intra, and inter building facilities according to plan and specification
  • 2.4 Organise installation of mains AC electrical power cabling infrastructure as specified on the plan
  • 2.5 Install cable distribution frames according to plan and manufacturer’s specifications
  • 2.6 Install protective earthing to metal infrastructures or gas arrestors according to specifications or design
3. Install uninterrupted power supply (UPS) power infrastructure
  • 3.1 Install batteries, rectifiers and uninterrupted power supply (UPS) systems as required by specifications or design and connect according to manufacturer’s and work health and safety (WHS) requirements
  • 3.2 Test and monitor UPS battery discharge levels and obtain replacement batteries under warranty where required
  • 3.3 Identify and rectify faults where possible or escalate according to enterprise policy
4. Restore site and complete documentation
  • 4.1 Attach infrastructure labels and designations according to enterprise requirements
  • 4.2 Complete inspection sheets and declare asset ready for customer sign-off documentation
  • 4.3 Clean up site
  • 4.4 Notify customer and obtain sign-off
No information
No information
Replaces
State Code National Code Title Type
WI914 ICTTEN3250B Provide infrastructure for telecommunications customer equipment Unit of competency
Replaced By
State Code National Code Title Type
OBA34 ICTTEN322 Provide infrastructure for telecommunications network customer equipment Unit of competency