Unit of competency Outline

Date retreived
22/07/2026 11:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce thermoset composites using pultrusion

Produce thermoset composites using pultrusion

Unit of competency
National Code
PMBPROD392E
State Code
ODA53
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
30
Description
This unit covers the skills and knowledge required to operate, control and optimise pultrusion production-line machinery to produce finished product.This unit applies to an experienced technician working alone or as part of a team.The unit principally refers to a continuous production operation similar to a thermoplastic extrusion line, where the operator must apply knowledge of the materials science and skills from learning and experience to set up and operate the line to achieve consistent, optimal productivity.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan work requirements
  • 1.1 Identify and check materials requirements, including additives, from job specifications
  • 1.2 Identify equipment and processes required for production and upstream and downstream operations from job specifications
  • 1.3 Perform pre-operational checks including checking for and controlling hazards
  • 1.4 Identify checks and testing processes required for equipment, materials, quality and production management to meet job specifications
  • 1.5 Identify waste management strategies to minimise scrap and trim according to workplace procedures
2. Perform pre-production tasks
  • 2.1 Verify equipment requirements against job specifications
  • 2.2 Set production process according to equipment and workplace specifications, and adjust process to optimise output based on selected materials
  • 2.3 Set up and adjust equipment and production line settings according to equipment and job specifications
  • 2.4 Verify materials, resins and fibres are correct against job specifications
  • 2.5 Set up date, batch and materials markings according to workplace procedures
  • 2.6 Undertake other pre-startup checks according to equipment specifications and workplace procedures
3. Operate and make adjustments to control pultrusion process
  • 3.1 Start up and operate pultrusion process, and make adjustments to settings to meet job specifications
  • 3.2 Ensure process is operating according to equipment specifications and workplace procedures
  • 3.3 Follow checking and testing processes to confirm if output meets job specifications and quality standards, and apply strategies to manage nonconforming outputs
  • 3.4 Maintain continuity of process to support production
  • 3.5 Work efficiently to minimise scrap and trim according to workplace procedures
  • 3.6 Clean, adjust and lubricate equipment according to equipment instructions
4. Shut down machinery
  • 4.1 Determine type of shutdown and process to be followed from equipment instructions and workplace procedures
  • 4.2 Shut down equipment according to equipment instructions and workplace procedures
  • 4.3 Clean equipment efficiently and effectively, using appropriate methods and materials according to equipment instructions
  • 4.4 Put guards, locks and notices in place to prevent inadvertent startup
  • 4.5 Accurately complete workplace shutdown documentation
  • 4.6 Clean and clear work area after shutdown in readiness for next startup
5. Anticipate and solve process control variances
  • 5.1 Recognise exiting or potential process control variances and their causes
  • 5.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 5.3 Monitor process control variances and corrective actions taken until resolved
  • 5.4 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAI17 PMBPROD392 Produce composites using pultrusion Unit of competency
State Code National Code Title Type
BGP1 PMB30121 Certificate III in Polymer Processing Qualification
BGO8 PMB40121 Certificate IV in Polymer Technology Qualification