Unit of competency Outline
Date retreived
22/07/2026 1:42 AM AWST
22/07/2026 1:42 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Bone small stock carcase - shoulder
Bone small stock carcase - shoulder
Unit of competency
National Code
MTMP3062B
MTMP3062B
State Code
D8950
D8950
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
Field of Education
110105 - Butchery
Original Release Date
Nominal Hours
150
Description
This unit covers the skills and knowledge required to remove primal cuts from the shoulder of a small stock carcase. Species that are covered by this unit include sheep, goats, pigs, kangaroos and any other small stock species processed.
Notes
Elements and Performance Criteria
1. Identify specifications for cuts
- 1.1. Specifications for cuts are determined using cut descriptions according to regulatory standards, customer specifications and workplace requirements.
2. Bone shoulder
- 2.1. Primal cuts are sliced and removed from the carcase according to work instructions and specifications.
- 2.2. Primal cuts are sliced and removed from the carcase according to Occupational Health and Safety (OH&S) requirements including the safe and effective use of a knife and following safe manual handling techniques.
- 2.3. Primal lines are cut in compliance with regulatory requirements.
- 2.4. Meat safety and quality hazards are handled according to workplace procedures.
- 2.5. Primals are cut to maximise yield.
3. Identify and remove defects
- 3.1. Defects are identified, removed and reported according to government regulations and workplace standards.
- 3.2. Persistent defects are reported to supervisor in accordance with work instructions.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Specifications may:
be derived from
AUS-MEAT
customer requirements
workplace requirements
and relate to:
age
gender
muscle groups
species
standard primals.
Workplace requirements may include:
enterprise-specific requirements
hygiene and sanitation requirements
OH&S requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
Boning systems or methods may include:
mechanical de-boning
side boning
table boning.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Regulatory requirements may include:
Export Control Act
relevant Australian Standards
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
state and territory regulations regarding meat processing.
Defects may include:
abscesses
bruising
ingesta
pathological lesions
product contamination.
Equipment may include:
bandsaw
bone cutters
hooks
knives
pouches
rise and fall platforms
stands
tables.
Communication skills may include:
listening and understanding
reading and interpreting workplace-related documentation
speaking clearly and directly
sharing information
working with diverse individuals and groups.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Specifications may:
be derived from
AUS-MEAT
customer requirements
workplace requirements
and relate to:
age
gender
muscle groups
species
standard primals.
Workplace requirements may include:
enterprise-specific requirements
hygiene and sanitation requirements
OH&S requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
Boning systems or methods may include:
mechanical de-boning
side boning
table boning.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Regulatory requirements may include:
Export Control Act
relevant Australian Standards
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
state and territory regulations regarding meat processing.
Defects may include:
abscesses
bruising
ingesta
pathological lesions
product contamination.
Equipment may include:
bandsaw
bone cutters
hooks
knives
pouches
rise and fall platforms
stands
tables.
Communication skills may include:
listening and understanding
reading and interpreting workplace-related documentation
speaking clearly and directly
sharing information
working with diverse individuals and groups.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated in an operating meat processing plant or facility at normal production speed.
Context of, and specific resources for assessment
Assessment must occur in a registered meat processing plant or facility.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this Unit of Competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated in an operating meat processing plant or facility at normal production speed.
Context of, and specific resources for assessment
Assessment must occur in a registered meat processing plant or facility.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this Unit of Competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W6712 | MTMP3062A | Bone small stock carcase shoulder | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAY95 | AMPA3063 | Bone small stock carcase - shoulder | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D599 | MTM30111 | Certificate III in Meat Processing (Boning Room) | Qualification |
| D604 | MTM30611 | Certificate III in Meat Processing (General) | Qualification |