Unit of competency Outline

Date retreived
23/07/2026 11:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect and service cooling systems

Inspect and service cooling systems

Unit of competency
National Code
AURT202170B
State Code
D7673
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
10/07/2012
Field of Education
030503 - Vehicle Mechanics
Original Release Date
10/07/2012
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to carry out the inspection and service of air and liquid cooling systems in an automotive retail, service and/or repair context.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Determine job requirements, including method, processes and equipment
  • 1.2. Read and interpret job specifications
  • 1.3. Access and interpret information from manufacturer/component supplier specifications and workshop manuals
  • 1.4. Identify equipment and tooling and check for safe and effective operation
  • 1.5. Determine procedures to minimise task time
2. Inspect cooling systems and analyse results
  • 2.1. Observe occupational health and safety (OHS) requirements, including individual state/territory regulatory requirements and personal protection needs, throughout the work
  • 2.2. Observe warnings in relation to working with pressurised cooling systems
  • 2.3. Perform cooling system inspection in accordance with workplace procedures and manufacturer/component supplier specifications
  • 2.4. Compare inspection results with manufacturer/component supplier specifications to indicate compliance or non-compliance
  • 2.5. Document results with evidence and supporting information and make recommendations
  • 2.6. Process report in accordance with workplace procedures
3. Carry out servicing
  • 3.1. Carry out servicing and adjustments in accordance with workplace procedures and manufacturer/component supplier specifications
  • 3.2. Select and use appropriate tooling, techniques and materials
  • 3.3. Make final inspection to ensure work is to workplace expectations
4. Prepare equipment for use or storage
  • 4.1. Complete servicing schedule documentation
  • 4.2. Remove waste and scrap following workplace procedures
  • 4.3. Clean equipment and work area and inspect for serviceable condition in accordance with workplace procedures
  • 4.4. Maintain and store tooling and equipment in accordance with workplace procedures
  • 4.5. Process job card in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2982 AURT202170A Inspect and service cooling systems Unit of competency
Replaced By
State Code National Code Title Type
WF400 AURTTC2001 Inspect and service cooling systems Unit of competency