Unit of competency Outline

Date retreived
21/07/2026 11:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Collect routine site samples

Collect routine site samples

Unit of competency
National Code
MSL952003
State Code
OEX81
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/12/2022
View on TGA
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
019909 - Laboratory Technology
Original Release Date
24/05/2023
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge to collect samples at field or production sites using specified equipment and workplace procedures.This unit of competency is applicable to production operators, field assistants and laboratory assistants in all industry sectors.No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1. Prepare for sampling
  • 1.1 Read sampling request and confirm the purpose, priority and scope of sampling required
  • 1.2 Liaise with relevant personnel to arrange site access and necessary clearances or permits
  • 1.3 Identify site hazards and review workplace safety procedures
  • 1.4 Confirm samples to be collected and sampling location, method and timeframe
  • 1.5 Assemble specified sampling equipment, safety equipment, materials and containers
  • 1.6 Conduct pre-use and cleanliness checks of all items to ensure they are fit for purpose
  • 1.7 Check all items against inventory and stow to ensure safe transport
2. Conduct sampling
  • 2.1 Locate and access sampling points at the site in accordance with security and workplace procedures
  • 2.2 Seek advice if the required samples cannot be collected or if procedures require modification
  • 2.3 Select and use sampling equipment in accordance with workplace procedures
  • 2.4 Record all labelling information in accordance with workplace and/or legal traceability requirements
  • 2.5 Record sample appearance, environmental conditions and any other factors that may impact on sample integrity
  • 2.6 Follow procedures for site security when sampling is completed
3. Finalise sampling
  • 3.1 Follow workplace procedures for required cleaning and decontamination of equipment and vehicle
  • 3.2 Check equipment, materials and samples against inventory and stow for safe transport
  • 3.3 Liaise with relevant personnel to restore normal production and/or services as necessary
  • 3.4 Maintain integrity of samples during transportation in accordance with workplace procedures
  • 3.5 Deliver samples to the required collection point and complete all documentation to ensure traceability
  • 3.6 Check and document serviceability of equipment before storage
4. Maintain a safe work environment
  • 4.1 Use established work practices and personal protective equipment (PPE) to ensure personal safety and that of others
  • 4.2 Minimise environmental impacts of sampling and generation of waste
  • 4.3 Dispose of waste in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWO36 MSL952001 Collect routine site samples Unit of competency
State Code National Code Title Type
BIX7 MSL30122 Certificate III in Laboratory Skills Qualification
BIX8 MSL20122 Certificate II in Sampling and Measurement Qualification