Unit of competency Outline

Date retreived
22/07/2026 1:18 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Terminate and test electrical wiring and accessories

Terminate and test electrical wiring and accessories

Unit of competency
National Code
MEM10016
State Code
AUX36
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
16/10/2015
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
16/10/2015
Nominal Hours
36
Description
This unit of competency has been developed for Engineering Tradesperson - industrial electrician apprenticeship training, and the recognition of trade-level skills in the termination and testing of electrical cables, cords and accessories using appropriate fixing devices and methods.It covers the installation requirements for a wide range of typically used electrical cables in a variety of situations and separation from other services, including fire wall penetrations.This unit covers the skills and knowledge required to meet the Electrical Regulatory Authorities Council (ERAC).Essential Performance Capabilities (EPCs):EPC 32 - Describe the construction, specifications, colour coding and applications of various types of cords and cables.EPC 33 - Demonstrate the skills to prepare and terminate cords and cables. EPC 34 - Demonstrate the knowledge and skills for selection and attachment of electrical accessories, using appropriate fixing devices, tools and methods.AndEssential Performance Capability (EPC) classified as ‘critical’:EPC 27 - Demonstrate knowledge of AS/NZS 3000 and local regulatory requirements for the installation of aerial conductors and underground wiring, including specialist cables. EPC 35 - Demonstrate the knowledge and skill to install and terminate a variety of electrical cables in a wide range of applications (including final subcircuits) to AS/NZS 3000.Some jurisdictions require the holder of this unit to be licensed or certified and users should check with the relevant authorities.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times, including appropriate risk control measures
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2. Prepare to terminate electrical cables and cords
  • 2.1 Inspect accessories to determine the appropriate type and size of cable/cord and termination connectors/lugs, as required
  • 2.2 Obtain specialised tools, equipment and test instruments needed for terminating electrical cables and cords
3. Terminate electrical cables and cords
  • 3.1 Isolate and tag circuits and equipment in accordance with procedures, where required
  • 3.2 Prepare cable/cord end to suit connector/lug without causing any damage to insulation or conductor
  • 3.3 Fit and secure specialist cable glands and retaining devices
  • 3.4 Ensure terminations/connections are made to specifications, manufacturer requirements, and regulatory and legislative requirements
  • 3.5 Ensure all entry points are sealed using appropriate compounds, including resins, where required
  • 3.6 Mark/tag and label all cables, wires, conductors and connections to specifications
4. Test electrical cables and cords
  • 4.1 Test terminated cables to ensure continuity and insulation resistance readings comply with requirements
  • 4.2 Complete all reports and documentation to the required specifications and SOPs
No information
No information
No information