Unit of competency Outline

Date retreived
22/07/2026 1:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Heat accelerate the curing of precast concrete

Heat accelerate the curing of precast concrete

Unit of competency
National Code
PMC552007
State Code
BAH68
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
60
Description
This unit of competency covers the skills and knowledge required to operate steam curing equipment and ancillary equipment that is integral to the process in order to accelerate the curing of precast concrete.This unit of competency applies to operators who are required to prepare the equipment, load and discharge moulds/products, monitor and adjust the equipment and rectify routine problems. This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare the equipment for production
  • 1.1 Conduct equipment pre-start procedures and visual checks according to enterprise procedures
  • 1.2 Set up and configure equipment start-up function in accordance with procedures/work instructions
  • 1.3 Ensure appropriate presetting period has been observed
  • 1.4 Load mould (containing green concrete product) onto transfer car and move to steam chamber in accordance with procedures/work instructions
  • 1.5 Cover mould as specified
  • 1.6 Close and secure the steam chamber in accordance with procedures/work instructions
2 Operate equipment
  • 2.1 Start up equipment in accordance with procedures/work instructions
  • 2.2 Ensure equipment is operated in accordance with established enterprise procedures
3 Monitor and record operation
  • 3.1 Monitor equipment performance in accordance with work instructions and manufacturer specifications
  • 3.2 Monitor operating pressures and temperatures
  • 3.3 Ensure the rate at which the concrete temperature increases is even, and that it doesn't exceed maximum temperature specified
  • 3.4 Adjust and control equipment to ensure correct product quality
  • 3.5 Complete appropriate records and logs
4 Rectify routine problems
  • 4.1 Identify the range of faults that can occur during the operation
  • 4.2 Determine and rectify fault causes by procedures/work instructions
  • 4.3 Identify and rectify equipment failure causes in accordance with procedures/work instructions
  • 4.4 Ensure appropriate records and log books of equipment operations are maintained to meet procedures/work instructions
  • 4.5 Identify non-routine problems and report to designated person
5 Shut down equipment
  • 5.1 Shut down steam and depressurise chamber in accordance with work instructions
  • 5.2 Allow product to cool gradually and evenly
  • 5.3 Open the chamber and discharge cured product
  • 5.4 Complete appropriate records and logs
  • 5.5 Ensure transfer cars are clear of all product and left ready for reuse
  • 5.6 Shut down equipment in an emergency situation
6 Prepare equipment for maintenance
  • 6.1 Isolate equipment in accordance with work instructions
  • 6.2 Remove any broken materials safely
  • 6.3 Make sure area is clear and safe for maintenance
7 Control hazards
  • 7.1 Identify hazards from the job to be done
  • 7.2 Identify other hazards in the work area
  • 7.3 Assess the risks arising from those hazards
  • 7.4 Implement measures to control those risks in line with procedures
No information
No information
Replaces
State Code National Code Title Type
WA915 PMC552007B Heat accelerate the curing of precast concrete Unit of competency
Replaced By
State Code National Code Title Type
OAF89 MSMPMC305 Heat accelerate the curing of precast concrete Unit of competency