Unit of competency Outline

Date retreived
23/07/2026 6:49 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Machine Parts

Machine Parts

Unit of competency
National Code
AUMGTW006
State Code
WH980
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
11/03/2014
Nominal Hours
36
Description
This unit describes the performance outcomes required to use a range of equipment to machine components and parts.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Work instructions and job specifications are identified and confirmed
  • 1.2 Resources required for work instructions are selected
  • 1.3 Machine controls and cutting tools are pre-set and adjusted to job specifications
  • 1.4 Measuring equipment is calibrated to specification
  • 1.5 Machine speed and feed controls are adjusted according to type of metal or alloy being machined
2. Produce parts
  • 2.1 Workplace procedures are identified and followed
  • 2.2 Parts are machined to specification using appropriate equipment and machining process
  • 2.3 Parts are machined and checked against job specifications and specified tolerances
  • 2.4 Identified faults and defects are rectified according to work quality goals
3. Complete work processes
  • 3.1 Work area and equipment are cleaned and maintained according to workplace procedures
  • 3.2 Faulty equipment is identified, tagged and reported
  • 3.3 Machined parts are washed, dried and inspected according to workplace procedures
  • 3.4 Work sheets and production schedule are completed and given to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
WE180 AUMGTW3006 Machine parts Unit of competency