Unit of competency Outline

Date retreived
23/07/2026 11:39 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate cell tending equipment

Operate cell tending equipment

Unit of competency
National Code
PMASMELT269
State Code
AXM53
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
02/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to operate cell tending equipment used to adjust and support the operation of reduction cells for the aluminium smelting (or similar) process.This unit of competency applies to operators who are required to change anodes, conduct beam raising, conduct metal tapping and bath tapping, replenish cell feed, and recognise and respond to 'out-of-parameter' issues.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate. The operator would be part of a team during start up and shut down procedures.This unit of competency does not require the operation of a central control panel.Some jurisdictions may require the operator of some equipment within this unit to be licensed or certified and users should check with the relevant authorities.
Notes
Elements and Performance Criteria
1 Plan and prepare for operations
  • 1.1 Interpret and confirm work requirements before proceeding
  • 1.2 Identify and control hazards
  • 1.3 Ensure appropriate authorisations have been obtained/issued
  • 1.4 Identify work flow path blockage (interruptions or bottlenecks)
2 Conduct pre-start requirements to procedures
  • 2.1 Conduct routine pre-start equipment checks
  • 2.2 Conduct isolation as appropriate for pre-start inspections
  • 2.3 Prepare equipment for operation
  • 2.4 Complete routine equipment checklists
  • 2.5 Complete reports as required for equipment inspections
3 Operate cell tending equipment to procedures
  • 3.1 Start up cell tending equipment and perform start up checks as required
  • 3.2 Conduct beam raising and anode changing as required
  • 3.3 Conduct cell replenishment as required
  • 3.4 Conduct metal tapping as required
  • 3.5 Transfer metal crucibles as required
  • 3.6 Conduct bath tapping as required
  • 3.7 Recognise and respond to emergencies should one arise
  • 3.8 Communicate with others in the reduction cell area
4 Shut down cell tending equipment
  • 4.1 Manoeuvre equipment to suitable parking position
  • 4.2 Shut down equipment
  • 4.3 Conduct shutdown checks of equipment
  • 4.4 Complete reports as required
No information
No information
Replaces
State Code National Code Title Type
W8917 PMASMELT269A Operate cell tending equipment Unit of competency