Unit of competency Outline
Date retreived
23/07/2026 11:31 AM AWST
23/07/2026 11:31 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Coordinate the operation of relevant plant and equipment for transmission pipeline construction
Coordinate the operation of relevant plant and equipment for transmission pipeline construction
Unit of competency
National Code
UEGNSG325A
UEGNSG325A
State Code
S8192
S8192
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
07/04/2014
Field of Education
040327 - Plumbing
Original Release Date
07/04/2014
Nominal Hours
54
Description
1) Scope:1.1) DescriptorCoordination of the operation of relevant plant and equipment necessary for the construction of transmission pipelines. This competency refers to: Excavator and vacuum lift; Bending machine and mandrels; Internal line up clamp; Tack Rig; Side Boom; Roller Cradles; Rock Saw; Bucket Wheel trencher; Sand Blasting Unit; Thermal Coil; Over ditch wrapping machine; Padding machines; Mitsu Bucket
Notes
Elements and Performance Criteria
1 Prepare plant and equipment for transmission pipeline construction
- 1.1 Work instructions are received and confirmed
- 1.2 OHS, environmental and sustainable energy policies and procedures to be followed for the work to be performed are received and confirmed
- 1.3 Easement is inspected and assessed using appropriate mediums and civil activities to determine in accordance with standard operating procedures relevant requirements
- 1.4 Discussion occurs with all persons to establish and confirm work schedule
- 1.5 Suggestions to assist with constructing pipeline easements are made to others involved in the work
- 1.6 Hazards are identified, OHS risks assessed and control measures are prioritised, implemented and monitored according to established procedures
- 1.7 Scope of responsibility under the relevant work permit isreceived and confirmed according to requirements and established procedures with relevant persons
- 1.8 Resources including equipment such as tools and personal protective equipment required for the job are obtained and in working order according to established procedures
- 1.9 Relevant responsibilities associated with first aid and other related work safety procedures at the worksite are confirmed in accordance with requirements and established procedures to ensure safety measures and followed in the instance of an incident
- 1.10 Third party issues are referred to appropriate persons in accordance with industry and community standards
2 Maintain relevant plant and equipment for transmission pipeline construction
- 2.1 OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents and hazards
- 2.2 Lifting, climbing, working in confined spaces, excavations, trenches, or aloft, and use of power tools, techniques and practices are safely followed in accordance with given instructions and according to requirements confirmed to eliminate the prospects of incidents
- 2.3 Work area is isolated and made safe and civil activities and construction of pipeline easements is carried out in accordance with given instructions and established procedures
- 2.4 Easement is constructed and confirmed to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements and established procedures
- 2.5 Operational knowledge as applied to potential hazards and safety risks are reported to the immediate authorised persons for directions according to established procedures
- 2.6 Non-routine events are referred to the immediate authorised persons for directions according to established procedures
- 2.7 Remedial action associated with constructing pipeline easements are dealt with using acquired known solutions and skills related to routine procedures to ensure work instructions and established procedures are met
- 2.8 Ongoing checks of quality of the work are undertaken in accordance with given instructions and established procedures
3 Complete procedures for operation of relevant plant and equipment for the construction of transmission pipelines
- 3.1 Pipeline easement work undertaken is checked against work schedule and anomalies reported to authorised persons in accordance with established procedures
- 3.2 Accidents and incidents are actioned and reported to authorised persons in accordance with established procedures
- 3.3 Work site is rehabilitated, cleaned up and made safe in accordance with given instructions and established procedures
- 3.4 Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures
- 3.5 Appropriate persons are notified of work completion according to established procedures
- 3.6 Work completion records, report forms and data sheets are completed accurately in accordance with given instructions and established procedures
RANGE STATEMENT
10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.
This Unit shall be demonstrated in relation to maintaining pipeline easements.
The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit:
Transmission Pipeline Plant and Equipment
Transmission Pipeline Construction Tools and Equipment
10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.
This Unit shall be demonstrated in relation to maintaining pipeline easements.
The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit:
Transmission Pipeline Plant and Equipment
Transmission Pipeline Construction Tools and Equipment
EVIDENCE GUIDE
9) The Evidence Guide forms an integral part of this Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.
Overview of Assessment
9.1)
Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with industry and regulatory policy in this regard.
Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.
The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.
Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included in the Assessment Guidelines of this Training Package.
Critical aspects of evidence required to demonstrate competency in this unit
9.2)
Before the critical aspects of evidence are considered all prerequisites shall be met.
Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines — UEG11’. Evidence shall also comprise:
A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:
Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range
Apply sustainable energy principles and practices as specified in the Performance Criteria and range
Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result
Demonstrate an appropriate level of employability skills
Conduct work observing the relevant Anti discrimination legislation, regulations, polices and workplace procedures
Demonstrate performance across a representative range of contexts from the prescribed items below:
Range of tools/equipment/procedures/workplace
Group No
The minimum number of items on which skill is to be demonstrated
Item List
A
All
Monitor the effective use of plant and equipment.
Ability to deal with conflict.
Ability to supervise staff.
Organise equipment according the needs of the project incorporating environmental/geological constraints (logistical organisation).
Dealing with and reacting to a variety of contingencies eg rain and transport of plant and equipment.
B
At least one occasion
Deal with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items
Context of and specific resources for assessment
9.3)
This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:
OHS policy and work procedures and instructions.
Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Unit.
Appropriate environmental regulation and work practices.
Appropriate organisational requirements.
Appropriate work environment, equipment and tools.
In addition to the resources listed above in context of and specific resources for assessment, evidence should show demonstrated competency in maintaining pipeline easements.
Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment. Assessment must also integrate the employability skills.
Method of assessment
9.4)
This Unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.
Note: Competent performance with inherent safe working practices is expected in the Industry to which this Unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the Essential Knowledge and Associated Skills described in this unit.
Concurrent assessment and relationship with other units
9.5)
There are no recommended concurrent assessments with this unit.
9) The Evidence Guide forms an integral part of this Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.
Overview of Assessment
9.1)
Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with industry and regulatory policy in this regard.
Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.
The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.
Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included in the Assessment Guidelines of this Training Package.
Critical aspects of evidence required to demonstrate competency in this unit
9.2)
Before the critical aspects of evidence are considered all prerequisites shall be met.
Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines — UEG11’. Evidence shall also comprise:
A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:
Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range
Apply sustainable energy principles and practices as specified in the Performance Criteria and range
Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result
Demonstrate an appropriate level of employability skills
Conduct work observing the relevant Anti discrimination legislation, regulations, polices and workplace procedures
Demonstrate performance across a representative range of contexts from the prescribed items below:
Range of tools/equipment/procedures/workplace
Group No
The minimum number of items on which skill is to be demonstrated
Item List
A
All
Monitor the effective use of plant and equipment.
Ability to deal with conflict.
Ability to supervise staff.
Organise equipment according the needs of the project incorporating environmental/geological constraints (logistical organisation).
Dealing with and reacting to a variety of contingencies eg rain and transport of plant and equipment.
B
At least one occasion
Deal with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items
Context of and specific resources for assessment
9.3)
This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:
OHS policy and work procedures and instructions.
Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Unit.
Appropriate environmental regulation and work practices.
Appropriate organisational requirements.
Appropriate work environment, equipment and tools.
In addition to the resources listed above in context of and specific resources for assessment, evidence should show demonstrated competency in maintaining pipeline easements.
Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment. Assessment must also integrate the employability skills.
Method of assessment
9.4)
This Unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.
Note: Competent performance with inherent safe working practices is expected in the Industry to which this Unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the Essential Knowledge and Associated Skills described in this unit.
Concurrent assessment and relationship with other units
9.5)
There are no recommended concurrent assessments with this unit.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAD47 | UEGNSG325 | Coordinate the operation of relevant plant and equipment for transmission pipeline construction | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J837 | UEG60114 | Advanced Diploma of Gas Supply Industry Operations | Qualification |
| J836 | UEG50114 | Diploma of Gas Supply Industry Operations | Qualification |
| J835 | UEG40114 | Certificate IV in Gas Supply Industry Operations | Qualification |
| J834 | UEG30114 | Certificate III in Gas Supply Industry Operations | Qualification |