Unit of competency Outline
Date retreived
23/07/2026 1:28 PM AWST
23/07/2026 1:28 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out the risk management process
Carry out the risk management process
Unit of competency
National Code
RIIRIS402D
RIIRIS402D
State Code
WH648
WH648
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/05/2014
Field of Education
080399 - Business And Management, N.e.c.
Original Release Date
30/05/2014
Nominal Hours
80
Description
This unit describes a participant’s skills and knowledge required to carry out risk management processes in the Resources and Infrastructure Industries.This unit it appropriate for those working in supervisory roles. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for implementing the risk management process
- 1.1 Access, interpret and apply risk management documentation and ensure the work activity is compliant
- 1.2 Identify and determine the process to be used for risk management
- 1.3 Identify, develop and document parameters of the risk assessment task
- 1.4 Access, interpret and apply the data required to complete the risk assessment task
2. Identify hazards
- 2.1 Identify and confirm types of potential hazards by reference to site circumstances, history and/or precedence
- 2.2 Establish and communicate to others the process for hazard identification
- 2.3 Undertake routine hazard identification
- 2.4 Add to the hazard identification process any potential variations from changes to work practices, systems or technology
- 2.5 Analyse the hazard identification process or parts of the process, to identify and prepare written documents to communicate loss scenarios
3. Assess risk
- 3.1 Determine the likelihood of the loss scenario
- 3.2 Analyse and determine the consequence if the loss scenario should occur
- 3.3 Determine the risk level of the loss scenario
4. Identify unacceptable risk
- 4.1 Source or determine site criteria for assessing the acceptability of risks in conjunction with the appropriate party
- 4.2 Determine the risk level or score
- 4.3 Seek expert advice and clarify findings which are ambiguous, unclear or of doubtful accuracy
5. Identify potential actions
- 5.1 Identify existing controls
- 5.2 Identify, analyse and document the range of risk controls for identified unacceptable risks
- 5.3 Identify risk control options using the hierarchy of controls, considering operational effectiveness
- 5.4 Verify feasible options for risk control by preliminary analysis and consideration
6. Decide on action
- 6.1 Select most appropriate risk controls for the situation from the feasible options
- 6.2 Clarify the decision and confirm the selected course of action following analysis of resource requirements, cost, safety and welfare issues within site constraints
- 6.3 Prepare written document outlining the selected course of action and resources required
7. Implement or facilitate action
- 7.1 Implement directly, or facilitate through others, the course of action plans
- 7.2 Maintain the standards for safety regulations and procedures
- 7.3 Communicate to all parties relevant information related to the new/revised work procedures and action plans
- 7.4 Reinforce requirements through observing the impact of information and implemented action plans
- 7.5 Coach others to effectively carry out action plans
8. Review the implementation of action
- 8.1 Determine and facilitate an ongoing review process to ensure implementation and application plans for risk controls
- 8.2 Routinely review process, actions and controls to ensure continuing effectiveness in the changing work environment
- 8.3 Respond to, or refer to the appropriate party for follow-up action, anomalies and shortcomings identified during the review process
9. Audit the risk management process
- 9.1 Conduct audits of risk management processes and work procedures and amend accordingly
- 9.2 Consult with others to identify issues to action plans
- 9.3 Respond to changed requirements identified during audits in a systematic and timely manner
- 9.4 Complete and retain all written risk management documentation covering the reason for, and changes made
10. Complete records and reports
- 10.1 Produce and process and all written risk management documentation and reports
- 10.2 Maintain all written risk management documentation and reports
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB419 | RIIRIS402A | Carry out the risk management processes | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBO99 | RIIRIS402E | Carry out the risk management process | Unit of competency |