Unit of competency Outline

Date retreived
23/07/2026 2:07 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out concrete work

Carry out concrete work

Unit of competency
National Code
RIICCM209E
State Code
OCX20
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
040399 - Building, N.e.c.
Original Release Date
18/06/2021
Nominal Hours
36
Description
This unit describes the skills and knowledge required to carry out concrete work in civil construction, including constructing and fitting reinforcement, erecting formwork, concreting and stripping formwork. It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for concrete work
  • 1.1 Obtain, interpret and confirm work requirements
  • 1.2 Access, interpret and apply documentation required to carry out concrete work
  • 1.3 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify, address and report environmental issues, potential hazards and risks
  • 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Confirm task requirements and select resources
  • 2.1 Determine location requirements of steel reinforcement and formwork
  • 2.2 Confirm reinforcement requirements
  • 2.3 Select formwork components and materials according to job and site requirements
  • 2.4 Select and use fixing or fasteners according to manufacturer specifications
3. Set out for concrete work
  • 3.1 Set string lines from existing pegs
  • 3.2 Check grades and confirm correct fall
  • 3.3 Identify services, protect and prevent damage
4. Construct and fit reinforcement
  • 4.1 Cut and bend reinforcing fabric and bars according to job requirements
  • 4.2 Tie and fix fabric and bars to configuration
  • 4.3 Attach stiffening rods to panels as required to facilitate handling
  • 4.4 Locate reinforcement material in formwork, and place it on bar chairs/spacers, and confirm clearance from formwork
  • 4.5 Locate and secure cast-ins
5. Erect formwork
  • 5.1 Clear work area and prepare surface for erection of formwork
  • 5.2 Set out formwork according to job requirements
  • 5.3 Assemble and brace formwork
  • 5.4 Position expansion joints to specification and to relevant Australian standard
  • 5.5 Position dowel joints
  • 5.6 Remove debris, sawdust and other waste material from formwork
  • 5.7 Apply release agent to manufacturer specifications
6. Carry out concrete work
  • 6.1 Place concrete to specified levels and grades and avoid segregation
  • 6.2 Compact concrete using immersion vibrator or other specified method
  • 6.3 Screed, finish and apply curing process to concrete
  • 6.4 Cover and protect concrete surface
7. Strip formwork
  • 7.1 Remove edge boxing and braces sequentially
  • 7.2 Denail, clean and store timber components according to site requirements
  • 7.3 Clean, oil and store steel components according to site requirements
  • 7.4 Discard damaged formwork components after stripping
8. Conduct housekeeping activities
  • 8.1 Clear work area and dispose of or recycle materials according to site requirements
  • 8.2 Clean and maintain condition of equipment, confirm suitability for use, and address and report issues as required within scope of own role
  • 8.3 Manage and report hazards, and maintain a safe working environment
  • 8.4 Process records according to site requirements
No information
No information
Replaces
State Code National Code Title Type
WH085 RIICCM209D Carry out concrete work Unit of competency